There are videos on YouTube that instruct you on how to do this. I had to try it a few times but it works.
Depnds on the code
11531
No, the programming code is unique to the manufacturer of the universal remote. It is possible with 'learning' remotes to get the infrared patterns from the original by 'beaming' the codes from the old one to the new one.
2002 Worked Perfectly!
465 was found during the automatic programming.
There are several sites that offer Philips remote programming instructions. A link is provided.
As with all universal remotes, the code for this amplifier will depend upon the remote unit you have. If you have tried programming it with all of the RCA Receiver codes available, you may have to change your remote to a newer model, buy a learning remote, or use a remote like the Logitech Harmony that has a much larger code database.
It looks like that is a universal remote. You will need to call the manufacture to get the code and instructions for programming it to our receiver. Most of the time, you will not get full functionality with any remote other than DISH Network.
hold down the lock and unlock buttons down at the same time for about 8 seconds on the remote. this should re-set the code.
Sedurity code to WHAT? The radio? The remote door lock control?
The code required for a Coby TV will vary depending on the TV itself and what remote you are programming. Some codes you can try when programming your remote are 505, 607, 625, and 633.
This question needs a little more information to get a complete answer. There are several types of remote synchronization. For example, rsync is a program used to sync 2 servers. From a remote control's perspective remote synchronization is used on a programmable remote that synchronizes with another remote either by code, or by programming buttons one by one.