0
If you use a 1 or 2 ground electrodes spark plug, these must have a 0.9mm gap. Besides, you can use a 4 ground electrodes spark plug (Super 4 from BOSCH) with the code FR78X, wich is able to be used with gaps from 0.9 to 1.1mm
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Volkswagen polo 1.4i spark plug gap?
The standard spark plug gap for a Volkswagen Polo 1.4i is 0.045 inches. The gap represents the space between the tip and the electrode.
Will 1999-2001 polo headlights fit a 1994-1999 polo model?
no
How do reset the oil service light on a 2001 polo South African model?
How do reset the oil service light on a 2001 polo?
How do you change sparkplugs on 2003 VW Polo?
Begin by removing the spark plug wire from the top of your 2003 VW spark plug. Remove the spark plug with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install your new spark plugs.
What is the spark plug gap for a 'w' plate Polo 1.0?
2000 Polo 1.0Ltr Engine code AER NGK & Beru plugs 0.7mm Bosch plugs 0.9 mm
What is the order of spark plug leads from distributor for a 1996 vw polo?
The 1996 VW Polo distributor wire order is 1-3-4-2. The number one spot should be marked on the distributor cap.
Where is the fuel filter on polo playa 2001 model?
Beneath the car, towards the centre between the engine and fuel tank.
What is the spark plug gap for a 1998 1.4 vw polo?
go to the spare shop and ask for a spec sheet of your car . and it should be under the gap clearance section of the spec sheet
Where is the radiator plug on a VW polo?
Where_is_the_radiator_plug_on_a_vw_polo
When did Fronte Marco Polo end?
Fronte Marco Polo ended in 2001.
What are the ratings and certificates for Marco Polo Return to Xanadu - 2001?
Marco Polo Return to Xanadu - 2001 is rated/received certificates of: Portugal:M/4
How do I change spark plugs on 1 2004 VW polo?
i think it should be the same as any other car you have 4 leads that run across your engine pull them off by hand then you will need a spark plug socket and ratchet unscrew them and replace try not to over tighten them attach the leads and away you go
