Want this question answered?
9, 8 to shift the bits in & 1 to move the byte into another register.
library ieee; use ieee.std_logic_1164.all; entity 3bitrc is port(
These are predefined words in VHDL standards. Bit indicates that the data type is a bit i. e. 0 or 1. A bit_vector is an array of bits. example: a: in bit; b: in bit_vector(1 downto 0);
12
8
library ieee;
There are several types of shift registers: PISO: parallel-in serial-out shift registers such as the 7495(?), 74HC165, 74HC166 serial parallel counter load a one and shift it out serially bingo sequential pulses SIPO: serial-in parallel-out shift registers such as the 74HC595, 74HC4094, TPIC6595, TLC5925. Typically data is shifted into the register one bit at a time through "the" input pin. Most "POV clocks" and "POV displays" use such chips to drive the spinning LEDs. Most such chips can be wired up to "shift left", or they can be wired up to "shift right", but once wired up can only do one or the other. bidirectional SIPO: bidirectional serial-in parallel-out shift registers. Once wired up, an external control line can dynamically switch it from "shift left" -- feeding in a new bit on the "least significant bit input pin" -- and at some other time it can "shift right" -- feeding in a new bit on the "most significant bit input pin". "universal" shift registers, such as the 74AC299, can do any of the above (at different times): output the current state of the register in parallel, shift left, shift right, and load the new state of the register in parallel.
how to save in assembly registrar for to call in program to compare in tasm
In VHDL, std_logic is a data type. It is assigned to input and / or output variables. It means that the variable is a standard logic type i. e. a logic bit which accepts or provides one bit data, either 1 or 0.
A bit bucket is a supposed place in where bits go when they fall off the end of a register during a shift operation - also known as the Great Recycle Bin in the sky.
PROGRAM:Library ieee;use ieee.std_logic_1164.all;entity ha1 isport(a,b:in bit;s,c:out bit);end ha1;architecture ha1 of ha1 isbegins
the question is a bit vague but there are several possible answers depending on the context. An electronic register can be a list of information which is held electronically. Such as an electronic public register which holds public information in a library. It can also be; A component of a microprocessor such as in an index register. It can be used to describe an electronic circuit such as a shift register or flip flop gate.