1 94-pound bag of cement is approximately equal to 1 cubic foot.
Depends on the size of the bag, normally around 2000 kilos.
An 80-pound bag of premixed cement = .667 cubic feet, or 2/3 of a cubic foot, of concrete. A 60-pound bag of premixed cement = .5 cubic feet, or 1/2 of a cubic foot, of concrete.
well concrete mix is a 1/3 gravel , 1/3 sand and 1/3 portland cement . I hope this helps.
Usually 1 cubic foot. It can be sold in smaller bags, but when someone refers to the ratio of cement in a concrete mix (i.e. a "5 bag mix") then they mean 1 cubic foot.
It depends on the weight of the bag. To calculate the volume of any bag we need to know the density. In freshly packed bags the standard density is 94 lbs/ft3 (1505 kg/m3). Example: to know the volume of a 50kg cement bag we divide the bag weight by the density, i.e.: 50 kg ÷ 1505 kg/m3 = 0.0332 m3 In practise, sand, cement and gravel are sold by weight, yet they must be mixed by volume. the black rubber buckets used in the building trade hold one 25kg bag of cement. a standard builders wheelbarrows volume is 70Lts so holds 4 of these buckets. The standard shovel here in Ireland is the long handled dovetail and 4 heaped shovels fills a bucket as near as need be.
volume of 1 cement bag is 0.035cu.m.
42.7kg, or 94 pounds. BTW, a bag of portland cement contains one cubic foot of the product.
94 pounds or 42.6377kg
94 pounds per bag.
A 50kg bag of cement is generally 33l. Generally 2 x 50kg bags fill 1 x 65l wheelbarrow. If you are unsure, read the back of the bag. Or check with your manufacturer. The RD is a comparison with the same volume of water at a controlled temperature. This should not be used to calculate the volume of cement in a bag. Use the Bulk Density of that type of cement. That info can be obtained from the manufacturer. An example is Ordinary Portland Cement (OPC) has a bulk density of 1500kg/m3. This means it is 1.5kg/l. 50kg/1.5 = 33.3l.
To properly answer this question, one would need to know the volume of a "bag", since "bag" isn't any standard of volume or weight. Typical Portland Cement has a density to 1505kg / cubic meter. In addition, one would also need to know the coarseness of the gravel, as the ability of the sand and cement to fill in the aggregate depends heavily on the average size of the gravel pieces.
Volume of One bag of cement =1.25cft =1.25x30cmx30cmx30cm=33.75 cub.cm. Density of One bag of cement =50Kg/1.25cft=40Kg/cft=40/30x30x30 =0.00148gm/cm
to calculate the volume of any bag we need to know the density. In freshly packed bags the standard density is 1440 kg/m3.Example: to know the volume of a 50kg cement bag we divide the bag weight by the density, i.e.:50 kg ÷ 1440 kg/m3 = 0.0347 m350kg = 0.0347 m3,50kg = 1.23 CFT======================================In the USA, a bag of cement usually weighs 94 pounds and has a volume of 1 cubic foot.
70 lb = 31751.465 g or 31.751 Kilo's
6.50 for a 50 pound bag 12 cents a pound
Depends on the size of the bag, normally around 2000 kilos.
An 80-pound bag of premixed cement = .667 cubic feet, or 2/3 of a cubic foot, of concrete. A 60-pound bag of premixed cement = .5 cubic feet, or 1/2 of a cubic foot, of concrete.