for instance 205/55/20 205 is 205 mm across the tire (width) 55 is 55 mm the profile 55 is a low profile tire (height of wall) And 20 is diameter or the rim ( size of the rim)
A 130/16.
Yes, you can use a replacement tire of 175-65-r15 for a 195-55-r15 rim.
The tire? No way. The 16" rim will require a 16" inside diameter tire. The rim could possibly be swapped provided the bolt patterns are exactly the same.
150, thats it w/o a new swingarm!
What is the widest rim you can put on a 2000 cadillac dts?
it depends on the stile of rim you use and how far you are willing for the tire to stick outside the body lines.... my tip is go look for rims that fit the impala.
You must know the answer is NO. Not necessarily true, we're talking about width I assume, the section width of the tire 10" in this case is measured at the widest part of the tire. The bead, the part of the tire that sits on the wheel, is significantly narrower. Just as an example P245/55R20, which is a 10" wide tire lists the apporved rim width as 7.0"-9.0", so depending on the exact size it is very possible that your 10" wide tire could go on a 7" wide rim.
i have a tire this size its 205/55/R16
Take the tire and the rim to a tire shop. It requires special equipment to properly replace the tire and balance the rim.
305mm wides or approx 12" 305=width(mm)-55=profile size (55%of width) -r20=the rim diameter(inches)
The 195 refers to millimeters (mm) and is the width of the tire across the treads. The 55 is also in millimeters(mm) and refers to the height if the tire from the edge of the rim(wheel) to the top of the tire. And finally, the 15 refers to inches (in) and refers to the diameter of the wheel that the tire fits to and the inside diameter of the tire.