Usually 1and 1/2 out from seated, 2 turns worked for me, i like to run it rich. Good luck!
Factory carb settings for a 84 Honda 200s
on bottom of carb
On the carb, on the bottom side facing out. should be a black knob you can turn with your fingers.
Only adjustment on it is the fuel mixture screw (on the bottom of carb) all the other jets are fixed, and the only way to modify is to buy new jets and install them.
If you look on the foot brake side, just where the cable meets the carb, there is a screw a little further in, that will adjust the idle. Use a long screw driver.
22mm is the float height for this carb
on the left(shifter side) of the carb, on the float bowl. small standard screw (flat head)
twist the screw under the carb
adjustment screw is between throttlre linkage and carb body on the right side of the carb as you stand at the front of the car looking at the carb
There is an idle adjustment at the carb. Look where the accelerator pulls the butterfly stop and you will see an adjustment screw.
To increase idle on the 2004 Honda Accord petrol model, apply carb cleaner on the adjustment screw on the throttle body to loosen up any form of debris. The car that I am enquiring about is UK model of a honda accord.
Its located on the right side of the carb. The screw has a spring on it and pretty easy to identify. Good luck