0
The main advantage of using this is remote access on the network.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Because of security violation the router password must be changed what information can you learn from these configuration entries?
The entries specify four Telnet lines for remote access. Access will be permitted for Telnet using "c13c0" as the password
What cannot be performed when using a telnet session to a remote router?
Password recovery
What is the difference between connecting to a router through the console port or through the telnet program?
If you connect to the router via the console port then you are physically making a connection with a physical cable to the router. This implies you have to be close to the router itself. Using telnet allows you to connect to the router from anywhere in the network, and doesn't require a physical cable connection.
Which application belongs to the category of the client server model?
Internet browser.
Why does the switch between Host and the router not require configuration with an IP address to forward packets?
If a switch is connected to a router then the MAC address of the router is known to the switch through that port. A host takes advantage of this by using the default gateway address (the address of the router) which the switch "knows" by its lookup table. Therefore, the switch can learn the address automatically and no configuration is necessary.
What is the purpose of using the copy tftp flash command on a router?
What is the purpose of using the copy tftp flash command on a router? to back up the current IOS image to a server to restore the IOS image from a server to back up the router configuration to a server to restore the router configuration from flash
Configuring communication between devices on different VLANs requires the use of which layer of the OSI model?
In order for traffic to flow between VLANs a layer 3 device (router) is needed. Typically, in order to configure a router, you'll do so using the command line (CLI) through telnet or ssh or the local console or a web browser. Consequently, the configuration of a router happens at layer 7.
WhAT configuration mode is used to set a password to authenticate users that are accessing and configuring the network device using a Telnet connection?
line vty
Where would the management IP address be configured on the switch in order to mange a Cisco swicth using Telnet?
The Management IP address will be configured on the Default Management VLAN (vlan1). Make sure to do a "no shutdown" command on the VLAN as for it is placed into the shutdown state when first configured. Also for telnet you will need to configure the Virtual Terminal Lines just as a regular Cisco Router. If more functionality is needed other than Telnet more configuration maybe needed depending on what switch is being used.
Which configuration mode is used to set a password to authenticate users that are accessing and configuring the network device using a Telnet connection?
VTY line mode
Which configuration mode is used to set a password to authenticate users that are accessing and configuring the network device using Telnet connection?
VTY line mode
How can you configure your modem with the router?
Usually modems do not require any configuration. But your router has to configures to get external IP from a DHCP server or whatever your internet provider is using.
