Computers are dynamic components there fore if just plain sitting there the power is minimum if really crunching data or working the power will surely increase greatly. Computer are never rated in amperes but Rather watts dissipation
14
You cannot pull more amperes from a series string of batteries than the weakest battery. Whatever is the lowest rated is the maximum rating for the string.
The "AF" stands for the Frame Ampere rating, so in this case will be 400 Amp Frame. The "AT" stands for Trip Ampere rating, and in this question will be 300 Amp Trip.
The ampere frame rating for a circuit breaker designates how the circuit breaker should be configured. It also states the trip unit of the amp.
The proper ampere rating of a circuit breaker for an electric arc welder depends on the arc welder. Each is different. Look at the nameplate on the arc welder and choose the circuit breaker and wiring accordingly.
60 ampere
14
30amps
Ampere-hours is a battery hold-up time rating. Volts is a voltage rating. The two are not related, so the question cannot be answered as asked.
You cannot pull more amperes from a series string of batteries than the weakest battery. Whatever is the lowest rated is the maximum rating for the string.
The "AF" stands for the Frame Ampere rating, so in this case will be 400 Amp Frame. The "AT" stands for Trip Ampere rating, and in this question will be 300 Amp Trip.
To find our what charging ampere to use a simple way is to divide the battery Ampere with its ampere hour (i.e. for car batteries they will say 75ah C/20) this means that the battery has 75 ampere rating based on 20 hour rating... as such to find the charging ampere divide 75 by 20 to get a charging ampere of 3.75... this is for a slow charge - to speed up the charge divide the ampere by 5 hours (to charge the battery from empty to full in 5 hours)...
The 1N4007 is a diode with forward current rating of 1 ampere, and a reverse voltage rating of 1,000 volts.
600 watts
5 amps
The amp rating for the alternator is printed or stamped on the exterior of the alternator case. It is the numerical ampere rating followed by the letter 'A', ie, '100A' would represent a 100 ampere rated alternator.
The ampere frame rating for a circuit breaker designates how the circuit breaker should be configured. It also states the trip unit of the amp.