answersLogoWhite

0

First check to be sure the printer is plugged into the wall and firmly into the back of the printer. If it is, unplug it and try plugging something else in the same outlet to be sure it is getting power.

User Avatar

Wiki User

9y ago

What else can I help you with?

Related Questions

Can you use any printer on the touchsmart computer?

You should be able to use any printer as far as you can have appropriate drivers.


Manufacturers of high-end printers provide what kits which include specific printer components step-by-step instructions for performing maintenance and any special tools or equipment you need?

Printer maintenance kits (Pg. 1161 A+)


Lexmark 3430 printer which will not turn off without unpluging Any suggestions?

Double-check on the power button on the printer, make sure it's not stuck. If not, unplug the power adapter from the printer. The power adapter is the black box behind the printer where the power cord is attached. Wait at least 30 seconds before plugging it back in. That should refresh the printer. Hope this helps.


What is the first step in the six step process for preparing a speech?

The first step in preparing any speech is selecting an appropriate topic.


Does turning off a printer save power?

Yes. Turning off any device when it is not in use will save power and energy.


Can an 18V-1.1 Amp DC power supply be used on 18V- 2 Amp DC printer?

you can try it, worse case it just wont power it enough. It will not harm the printer in any way, it just might not have enought "juice" to power it.


What step by step guide to poly printing?

To start poly printing, first, ensure your 3D printer is compatible with the filament and set it up correctly. Next, prepare your 3D model by slicing it with appropriate settings for poly printing, focusing on temperature and print speed based on the filament type. Load the filament into the printer and calibrate the bed to ensure proper adhesion. Finally, start the printing process and monitor for any issues, adjusting settings if necessary for optimal results.


How do you setup Epson lx310?

To set up the Epson LX-310 printer, first, unbox the printer and remove any packing materials. Connect the printer to a power source and plug it into your computer via USB or set it up on a network if using a network connection. Install the necessary drivers, which can be downloaded from the Epson website, and follow the on-screen instructions for configuration. Finally, load the appropriate paper into the printer and perform a test print to ensure everything is functioning correctly.


Can the order of solving rational equation steps be changed?

Step 1: Yeah, absolutely Step 3: Just analyse the equation Step 2: Work out the appropriate formula.


Hp 8500 paper jam error but there is no jam how to resolve?

Follow these steps: Turn off the printer. Disconnect the power cord and any other cable. Remove jammed paper from the following areas. Replace any parts that were removed, and close any open doors. Reconnect the power cord, and other cables that were disconnected. If you are unable to resolve the issue then contact printer support USA +1 8669184391.


Does the Cable Unlimited Female Printer cable work with any printer?

Yes, the "Cable Unlimited Female Printer" will work with any USB or parallel cable printer.


Is a network printer an impact printer?

maybe, a network printer is any printer connected via network cable