There are a lot of film formats created for showing video. 35mm or 70mm denotes the projection gauge or width of the release print film. A number of film formats produce release prints of the width 35mm and 70mm. The major difference in film formats is the aspect ratio of the rendered picture. The aspect ratio of the video shown in television is usually 4:3 while that shown in a movie theatre is 16:9. The quality of the picture seems to be good in the latter aspect ratio. Plz Check http://en.wikipedia.org/wiki/List_of_film_formats for more info
Because the film is 35mm wide.
If the name has any term like 35mm or anything of the like, it is a film camera, using 35mm roll film.
A 35mm slide scanner is good for converting 35mm film into DVDs.
There are actually several types of 35mm film, and several frame sizes that can be put onto the film to achieve different aspect ratios and to get more out of the film. So the short answer is, it depends.
You can not convert a RollieCord TRL camera to use 35mm film instead of 120 film. This camera was designed to only work with 120mm film while shooting. However, there are models of RollieCord TRLs that do only take 35mm film too.
35mm
Maximum of 36 shots for a 35mm film.
The aspect ratio of a duct can be evaluated as the ratio of width to height. As the aspect ratio increases, vibration noise, friction and cost also increases.
That is a 16:9 aspect ratio.
ECN II film is motion picture film.
the correct aspect ratio for 4x3 = 1.333 the correct aspect ratio for 16x9 = 1.777