50 amps
50 amp breaker wired with AWG # 6 wire.
50 amp
A 30 amp breaker run 75 feet would require you use AWG #10 wire. But, an oven normally pulls more that 30 amps and I would not use #10 wire on a 30 amp breaker for an oven. Normally any newer oven is wired with AWG #6 gauge wire on a 50 amp circuit breaker so the breaker will not trip during heavy use of the oven. Some older ovens could use a #8 wire on a 40 amp breaker.
a 220 volt, 3200 watt oven will draw under 15 amps, so yes a 2o amp breaker will work.
You have a double pole breaker for 240Volt supply. The maximum current is 15 amp.
50 amp breaker wired with AWG # 6 wire.
That is 10 amp wire.
Look at its nameplate. Divide its power rating by its voltage rating -this will tell you how much current flows when the refrigerator is running on its cooling cycle.
Normally older ovens required a AWG #8 wire on a 40 amp breaker. On a modern double oven I would recommend you install AWG #6 on a 50 amp breaker. That way you are safe and will not have to worry about the breaker tripping. It will cost a little more but is worth it in the long run.
You need to instal the same size and amp rating as you removed.You need to instal the same size and amp rating as you removed.
3Amp
1 ton ac amp
yes two fuses in parallel will increase the amp rating but its not a good practice try to get the proper fuse!
10
50 amp
no
From a 120 Volt supply, the Amp rating is calculated as 2,000 Watts (which is 2kW) divided by 120 Volts = 16.7 Amps.