0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the relationship between peak rms and average values of an ac voltage?
Peak voltage of an AC voltage is the value at its highest or lowest point.RMS (Root Mean Square) voltage of an AC voltage is a mathematical derivation involving the square root of the average value of the squares of samples of the voltage as the sample interval approaches zero.Average voltage is simply that - the average or mean voltage.For a true sine wave, RMS and average are equivalent, but they are not equivalent when the wave is distorted, or has some other shape such as triangular.RMS is the best way to measure an AC voltage, as it gives you a true reading of the amount of power that the voltage can deliver.One issue with non-RMS AC meters is that they typically measure the rectified, filtered peak value and then compensate by dividing by 1.4. This is not correct unless the voltage is a sine wave.AnswerThe peak value of an a.c. voltage or current is the amplitude of that voltage or current waveform -i.e. the maximum value of voltage or current in either the positive or the negative sense.The root-mean-square (rms) value of an a.c. voltage or current. For a sinusoidal waveform, the rms value is 0.707 times the peak value (amplitude). A.C. voltages or currents are always quoted in rms values unless otherwise specified.The average value of an a.c. voltage or current is zero over one complete cycle so, when used, it applies only over one half cycle. Therefore, the average value for one-half cycle of a sine wave is 0.637 times the peak value. Average values are of little relevance to a.c. calculations.
How is high voltage used for the electricity that is delivered to your homes from regional generating stations?
The electricity that is delivered to homes from the regional generating stations uses high voltage in its distribution. This is then transformed from the high voltage on the primary side of the transformer to a lower voltage on the secondary side of the transformer. The common household voltage throughout North America is 120/240 volts obtained from the secondary windings of the step down utility owned transformer.
What is RMS Peak value and average value?
RMS is used to determine the average power in an alternating current. Since the voltage in an A/C system oscillates between + and -, the actual average is zero. The RMS or "nominal" voltage is defined as the square root of the average value of the square of the current, and is about 70.7% of the peak value.************************************************************The r.m.s. value of an alternating current or voltage is the value of direct current or voltage which produces the same heating effect.Fo a sine wave, the r.m.s. value is 0.707 x the peak value.The average value is different; for a sine wave it is 0.636 x the peak value.
The effective value of ac voltage is calculated as?
EFFECTIVE HOW ABOUT AVERAGE .639 of peak.AnswerThe 'effective' value of an a.c. voltage (or current) is the same as its 'root-mean-square' (r.m.s.) voltage which, for a sinusoidal waveform, is 0.707 Umax.The 'average' value of an a.c. voltage (or current) is zero over a complete cycle, or 0.639 Umax, over half a cycle (usually applied to rectified waveforms).
When a 3.3V zener diode and a 5V zener diode are connected in parallel what is the average reverse break down voltage?
There will be no "average" reverse breakdown voltage. When the applied voltage reaches 3.3v, the 3.3v zener will conduct and the voltage will go no higher. The 5v zener will never conduct because the voltage across it will never go higher than 3.3v The only way the 5 volt zener will ever conduct is if the 3.3v zener fails. ALAN H.
What is the standard voltage in Alberta Canada?
Household is 120/240 volts at 60Hz. The average wall socket is 120v 60Hz.
How is electric current of high voltage made suitable for household consumption?
The voltage is reduced, in transformers.
What is the household ac electrical power mains voltage in Italy?
The voltage is 230volts and this is the norm in Europe.
How electric current of high voltage made suitable for household consumption?
The voltage is reduced, in Transformers.
What is the standard Chilean household voltage and ampreage?
220V 50Hz
Average household income in Toronto Canada?
As of 2021, the average household income in Toronto, Canada is estimated to be around $100,000 CAD per year. However, this figure can vary depending on factors such as household size, location within the city, and the composition of the household.
What is the resistance of a 60.0 W light bulb in a household circuit roughly?
Power = (voltage)2/ResistanceResistance = (voltage)2/(Power)The standard household voltage in North America is 117 V.Resistance = (117)2/(60) = 228 ohms (rounded)
How many DVDs on average does a household own?
How many DvDs do the average household own?
What voltage is used in Germany?
AC voltage is 220v in Germany.Normal household appliances are 240v, some dual phase appliances such as cookers are 400v.
What is the current power and voltage rating of 3 household appliances?
350
How many volts are need for an electric blanket?
It depends on which country that you live in. European and UK, the household voltage is 230 volts. In North America, the household voltage is 120 volts. Other countries around the world, the blankets that are sold will match the household supply of that country.
What is average voltage?
Another name for average voltage is the RMS (Root Mean Square). This is a voltage derived from the peak to peak voltage multiplied by .707. If the peak to peak voltage is 170 volts then the average voltage (RMS) would be 170 x .707 = 120 volts.
