Want this question answered?
how do i bid on stripping and waxing a floor
Stripping and waxing VCT can cost anywhere between 20-30 cents per square foot depending on the condition of the floor. To scrub and recoat costs about 15-20 cents per square foot.
You could use floor stripper with a floor machine with a black stripping pad on it
Floor waxing allows one to have a shiny, glossy, clean looking floor. Waxing floors may also protect them against spills and dirty marks. Floor waxing is quite simple and there are a variety of products on the market allowing one to wax floors by hand or by machine.
form_title=Vinyl Floor Cleaning and Polishing form_header=7543 What kind of service do you need?*= () One time () Recurring () Not sure What are the floor's dimensions?*= {"Select One,Less than 1,000 sq ft,1,000-5,000 sq ft,5,000-10,000 sq ft,More than 10,000 sq ft,Not sure"} What type of cleaning are you interested in?*= [] Polishing / Buffing [] Stripping [] Waxing [] Cleaning
First, it's easy to determine square footage with the 12 inch square linoleum floor tiles. Simply count them horizontally and vertically and multiply. To example a room that is ten tiles wide and 8 tiles long (10 X 8 = 80) has eighty tiles. The next question is more difficult - how much wax buildup is on the floor. If you can address those two questions, you are on the way of havin the answer for how long it will take to strip the floor. Before waxing, it's recommended that the floor be rinsed to clean, neutralize and remove excess stripper. Waxing will be much easier. It just needs to be applied smoothly and evenly. However, at least 2 coats should be applied
ARTCO Floor Care Business in Sarasota charges approx. 35 cent per square foot, which includes STRIPPING & REFINISHING..(& apply FOUR COATS FINISH)...of all HARD surface floors..we also offer FREE ESTIMATES... you walk on it- we clean it !!
A waning moon is a moon going from a full moon to a new moon.A waxing moon is going from a new moon to a full moon.In other words, waning is going away and waxing is coming.
That depends on where you are, Here in California, S.F., It cost $4.25 per sq. ft. to refinish a wood floor. And being that it has a wax finish, it can cost more because the floor contractor might have to use extra steps to get that wax finish off. That is my profession, and wax is one floor I hate to refinish. Like I said before, it depends on where you are.
Mop the floor with hot water and soap (let it sit on the floor for about 15 minutes) . If the floor is really dirty you can buy a mild floor stripping product from your hardware store or you can rent a floor buffing machine. When the top dirt has been removed you can scrub the grout lines by hand with a green scrubbing pad with soap and water.
The average thickness of an American house floor is about one inch. This would include the subfloor and any time of other floor covering.
check the weather stripping along the roof over the doors (both sides). if the car is in good shape, replace stripping with original equipment from dealer. otherwise, run a bead of clear silicon.