I bought the 'Actron obdII auto scanner' from Sears to cover a 2000 Ford and an 03 Chevy cost about $80. Like you Im a light to medium DIYer. Also I use it on friends cars and have saved them a few schekels at the stealer or the mechanic down the road..
I bought the 'Actron obdII auto scanner' from Sears to cover a 2000 ford and an 03 Chevy cost about $80. Like you Im a light to medium DIYer. Also I use it on friends cars and have saved them a few schekels at the stealer or the mechanic down the road..
I bought the 'Actron obdII auto scanner' from Sears to cover a 2000 Ford and an 03 Chevy cost about $80. Like you Im a light to medium DIYer. Also I use it on friends cars and have saved them a few schekels at the stealer or the mechanic down the road..
get a scanner and check the datastream for the TPS sweep voltage or go to a qualified mechanic for a diagnostic
Where is the diagnostic scanner port on a 1995 F-250 4x4
Reading diagnostic codes is easy. The driver plugs the reader/scanner into the diagnostic port of the vehicle, and the scanner/reader will give a code if there is a problem, and tell them the type of problem.
Any OBD2 scanner will work.
You need a scanner. Go to autozone/advanced auto and you can borrow a scanner from them.
an advantage is is that u can impoirt pictures
Diagnostic plug. Diagnostic connector. Data link connector.
Most diagnostic scanners with Obd 2 will display on screen the problem, older Obd 1 codes can be found in the cars repair manual or in the guide that usually comes with the scanner.
To hook up the scanner for a 1994 Plymouth Sundance, locate the OBD-I diagnostic port, which is typically found under the dashboard on the driver's side, near the steering column. You may need to remove a cover or panel to access it. Once located, connect the scanner's cable to the diagnostic port, and then turn on the ignition to begin the diagnostic process.
There are many advantages of having a scanner. The main advantage is that you can recreate documents on the computer.