The bolt pattern of all Caprice 1991-1996 is 5X127.0mm 12mmX1.5mm
More info at link
You will be looking at an engine overhaul which can cost $2,500 to $3,000.
Blow-by (Bad engine rings)
The 1991-1996 Caprice and Impala have a 5x5 bolt pattern. It is 5x127mm in metric terms.
5X5 large Chevy pattern
Look for a blockage in the exhaust, most likely the cat, or a pinched pipe.
All 91-96 GM B-body cars have a 5" wheel bolt pattern.
what type of antifreeze do i need to use on a 1995 chevrolet caprice
yes it will as longgest as you atleast raise you caprice for atleast 2 inches. and make sure u get the right bolt pattern most caprices have 5.0 bolt pattern. or otherwise u will have to buy adapters which they are about $100..
Yes
The TCC solenoid on a 1995 Caprice Classic is located in front of the transmission. It is bolted to the bottom of the pump.
on a 1995 caprice with 4.3 L 8cyl you have to remove a pulley and the water pump to get to the cap and rotor and it is very expensive.
in the tank