Want this question answered?
You are supposed to measure the "rough" opening. This is distance from the studs that line the door opening. (not from the door frame itself) Top to bottom then from side to side. If you already have a door there and are just replacing it then you can just measure the door and get one of the same size. Good luck.
Yes, if you modify the frame.
The exterior door handle on a Ford Fusion is replaced by first removing the inner door trim, retaining bolts, and window knob. The door handle can then be unbolted from the frame and a new one put in its place.
what is the side post of a door frame called
A side lite
If you just want to remove the door, simply unscrew the hinges.Be careful, it will be pretty heavy.If you want to replace the door and frame as a unit:Take the door off the frame by removing the hinges.Remove the trim (moldings) around the interior and exterior of the door frame.Cut the door jamb completely through at about waist hight.It doesn't matter which side you start on, it just makes the frame easier to remove.Pry the door frame you've cut away from the studs.Once you get one side out the top and the other side will come out easily.The threshold will be stuck down pretty well, you'll need a big pry bar to get it up.Okay, now you've got a big hole in the font of the house.Have you ever put in an exterior door before?
An exterior door is a door that opens to the outside of the structure.
Transom
It is called a door frame. Or if you are talking about the edges of the wall, its the molding.
yes it is called a jamb.
assuming you plan to change the speakers on the frond doors, remove the bottom screws on the door frame (they should be facing up), then remove the bottom half of the door panel. Unscrew the stock speakers and replace them with new ones. Then put the door frame back on the door.
Sometimes called A-Pillar