Want this question answered?
1.51 g/cc
It will be around 25 to 35kN/cum depending on the type of contents in Refractory brick. Regards N. Suresh kumar
1086 kg per m3 (bulk: not the press surface) 1184 kg per m3 (bulk: press surface but not bang) 1365 kg per m3 (press surface and bang 5 more time)
Bulk density of coking coal depends on many factors. But commonly it can be told as 0.8 T/Cu.M.
hdgyuexuvuvexcuwve
1.51 g/cc
It will be around 25 to 35kN/cum depending on the type of contents in Refractory brick. Regards N. Suresh kumar
A low cement refractory concrete is termed 'low-cement castable refractory'. It includes castable refractory based on alumina and/or alumino-silicates which contain hydraulic setting cement. The total lime (CaO) content on a calcined basis is between 1 and 2.5 percent. More information is available in ASTM C401.
what is cement density
Use refractory cement.... see above
A 50kg bag of cement is generally 33l. Generally 2 x 50kg bags fill 1 x 65l wheelbarrow. If you are unsure, read the back of the bag. Or check with your manufacturer. The RD is a comparison with the same volume of water at a controlled temperature. This should not be used to calculate the volume of cement in a bag. Use the Bulk Density of that type of cement. That info can be obtained from the manufacturer. An example is Ordinary Portland Cement (OPC) has a bulk density of 1500kg/m3. This means it is 1.5kg/l. 50kg/1.5 = 33.3l.
Bulk density = dry weight / volume, then by knowing the dry weight and bulk density we can calculate the volume.
bulk density depend on that material from which soil formed. so maximum bulk density depend on particle density of that mineral. Therefore,we can only tapped the soil upto perticle density. so maximum bulk density may be occur at equal to paricle density.
1086 kg per m3 (bulk: not the press surface) 1184 kg per m3 (bulk: press surface but not bang) 1365 kg per m3 (press surface and bang 5 more time)
Definitely, soil texture influences soil bulk density
The density of Portland cement is 1.44 ton/m3.
Bulk density is the dry mass of the solids (M sub t) / total volume (V sub t) Particle density is bulk density (P sub b) / 1 minus total porosity (1-theta).