Usually it is caused by a faulty ground at your main panel.
150 / 120 = 1.251.25 x 100 = 125answer:125%150 volts is 125 percent of 120 volts.
150 volts is 125% of 120 volts.
600 volts is five times the 120 volt primary, so the secondary winding must have 750 turns, which is five times as many turns as the 150 turns of the primary winding.
It would probably not work on 150 volts. Many televisions can be adjusted to work on 230 v (Europe) or 120 v (USA).
You will need a 50 kW generator for a single phase 120/240 volt service.
A 1000 MCM copper conductor will limit the voltage drop to 3% or less when supplying 150 amps for 400 feet on a 120 volt system.
A house current reading of 150 volts is not normal, as standard residential electrical systems in most countries operate at around 120 volts or 230 volts, depending on the region. If you're measuring 150 volts, it could indicate a problem with the electrical supply or equipment. It's advisable to consult a licensed electrician to investigate and ensure safety.
6000amps <<>> The above answer must have big lugs to accommodate 6000 amp capacity wire. In my breaker catalogue the largest 120 volt single pole breaker is 70 amps, 277 volt single pole is 150 amps and 347 volt single pole is 100 amps. The 120 volt single pole breaker occupies two opposed slots because of its length.
"va" is volts x amps, so you need to know the volts to get the amps. If you're dealing with houshold power, the volts will be 120 or 240, depending on where you live.If it's North America, 150va will run 150/120 = 1.25 amps. In the EU it would be .625 amps.
I have never seen a 100 Volt rated outlet. Usually outlets would be rated for 110 to 120 volts for residential use, or maybe 150 volts. The rating is separate from what voltage the outlet is providing. If your outlet is supplying 100 volts, as measured by an accurate voltmeter, you have some problem in your wiring or a faulty outlet. If there is only 100 volts at the outlet get an electrician to diagnose the problem if you are not completely familiar with home wiring. In general you should never use an outlet that has a voltage or current rating less that the device will consume.
18000
120% of 150 = 120% * 150 = 1.2 * 150 = 180