"va" is volts x amps, so you need to know the volts to get the amps. If you're dealing with houshold power, the volts will be 120 or 240, depending on where you live.
If it's North America, 150va will run 150/120 = 1.25 amps. In the EU it would be .625 amps.
To convert VA to amps, you can use the formula Amps = VA / Volts. In this case, Amps = 140 VA / 240 V = 0.5833 Amps.
Amps (A) measure electrical current flow, while volt-amps (VA) measure apparent power in an electrical circuit, which is the combination of both real power (measured in watts) and reactive power. Essentially, amps refer to current, while volt-amps refer to total power.
12 V DC, 18 VA (watts) how many amps? Formula: amperage I = power P (VA) divided by voltage V. So, amperage I = 18 watts / 12 volts = 0.083 amperes.
To calculate amps from VA, you can use the formula: Amps = VA / Volts. Assuming the standard voltage in residential settings is 120V, then 145VA / 120V = 1.21A. Therefore, 145VA is approximately equal to 1.21 amps.
No, 1000VA does not necessarily equal 10 amps. The relationship between VA (volt-amperes) and amps depends on the power factor of the load. For a purely resistive load (like an incandescent light bulb), 1000VA at 120V would be equivalent to approximately 8.3 amps.
Multiply the amps by the volts and the answer is the VA
To convert VA to amps, you can use the formula Amps = VA / Volts. In this case, Amps = 140 VA / 240 V = 0.5833 Amps.
Amps (A) measure electrical current flow, while volt-amps (VA) measure apparent power in an electrical circuit, which is the combination of both real power (measured in watts) and reactive power. Essentially, amps refer to current, while volt-amps refer to total power.
12 V DC, 18 VA (watts) how many amps? Formula: amperage I = power P (VA) divided by voltage V. So, amperage I = 18 watts / 12 volts = 0.083 amperes.
To calculate amps from VA, you can use the formula: Amps = VA / Volts. Assuming the standard voltage in residential settings is 120V, then 145VA / 120V = 1.21A. Therefore, 145VA is approximately equal to 1.21 amps.
No, 1000VA does not necessarily equal 10 amps. The relationship between VA (volt-amperes) and amps depends on the power factor of the load. For a purely resistive load (like an incandescent light bulb), 1000VA at 120V would be equivalent to approximately 8.3 amps.
To calculate the amperage, divide the VA (volt-amps) by the voltage. In this case, 4.8VA divided by 24V = 0.2 Amps.
'425 VA' is short-notation for '425 Volt-Amps'. This value gives the number of Amps against the number of Volts, but referring to this as just 'Amps' is perfectly acceptable.
Multiply Volts x Amps
NO! "Va" is abbreviation for the state of Virginia. "VA" is abbreviation for Veteran"s Administration.
For all intents and purposed the VA rating is the same as the wattage rating of appliances. VA is an electrical classification for Volt Amps. The formula for watts is, Watts = Amps x Volts.
The maximum current capacity of a circuit breaker rated at 150 amps is 150 amps.