0
What is the cause of heat generation when we apply brakes on our fast moving car?
Wiki User
∙ 8y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Your car has a shimmy when you apply the brakes at hi speed?
The most likely cause is a warped rotor. It can also be other things so have you brakes and suspension inspected.
What would cause the front wheel to screech while driving but not when you apply the brakes?
Possibly bad wheel bearing.
What can cause squeaking when tire is moving?
brakes that are dirty or worn out. also check your shock absorbers or springs. or a worn bearing
When you apply the brakes hard vehicle has a pool which is accompanied by a vibration what the cause of this condition be?
Check with a tire store and see if you need an alignment.
Why does 2001 Chevy truck 2500 vibrates when apply brakes to stop?
Most common cause of that is the rotors are out of round are warped. REPLACE ROTORS.
What would cause the RPM to raise when you apply the brakes on a Saturn SL2?
vacaum leak or bad throttle position sensor. gm Jim
In order to cause a moving body to pursue a circular path it is necessary to apply what?
You must apply a force towards the centre of the circle. This is called a centripetal force.
What could cause one of your rear drum brakes to brake more sharply than the other one you already replaced the brake pistons and bleeded the system?
un equal adjustment of brakes will cause one brake to apply earlier and harder than other brake
I had new brakes rotors and calipers and the brakes are squeling now.The garage said my brakes where to hard and they had metal in them they sanded them.Still squeling What could be the cause.?
first of all, the pads may be semi-metallic and have chunks of metal in them which may cause the squeal, change to a less metallic pad may help, also the backing of the pads should have an anti-squeal gel applied to them, when you apply the brakes, the pads will hyper vibrate and can cause a squeal. The gel will stop the vibrating. first of all, the pads may be semi-metallic and have chunks of metal in them which may cause the squeal, change to a less metallic pad may help, also the backing of the pads should have an anti-squeal gel applied to them, when you apply the brakes, the pads will hyper vibrate and can cause a squeal. The gel will stop the vibrating.
How do you adjust the drum brakes on a 95 stratus?
INITIAL ADJUSTMENT PROCEDURE Be sure parking brake lever is fully released. Fully apply the vehicles service brakes 2 to 3 times by depressing the brake pedal as far as possible. This will cause the automatic adjuster mechanism to correctly adjust the rear drum brakes. Apply and release the park brake lever one time after the service brakes have been correctly adjusted. This procedure has correctly adjusted the vehicle's rear service brakes.
Front wheels shudder when I apply brakes?
Front wheel shudder could come from worn tires, bad brakes, or worn front end components. Check all of these to find the cause of the shudder.
What would cause the automatic door locks on a Dodge Caravan to continuously lock and unlock?
bad ground on chassis. do the lights seem dim when you apply the brakes?
