Want this question answered?
1999 Dodge Stratus SedanBolt Pattern (in):5x4.00Bolt Pattern (mm):5x100Offset Range (mm):40 to 45Wheel Size Range (in):14x5.5 to 20x7.5Front Center Bore (mm):57.1Rear Center Bore (mm):57.1Stud_Size:12x1.5
no they will not you need to take them to a machine shop so they can bore them out because the center hub is much larger on the older dodges
4.000" the engine bore size
The Chrysler LA 318 has a standard bore of 3.91 inches.
the 360 l.a. engin came fatory with a 4" bore
Lug pattern is correct but center bore is way too small, unless machined they will not work.
Bolt Pattern : 5x4.41 in / 5x112mm Stud Size : 14mm x 1.5b Center Bore: 57.10 / 2.25 in
A bore refers to the extremely fine or narrow tube found in a thermometer. It is called a narrow bore or a capillary.
A minimum plain bore sprocket is a roller chain sprocket with a hole drilled through the center. A finished bore sprocket is a roller chain sprocket with a hole drilled through the center augmented by either a keyway or set screws.
106
Bore = 4.00 inches Stroke = 3.48 inches Measure cylinder bore with heads off, measure crank main center-line to rod main center-line then multiply by 2 to get stroke. Stock Chevy 350 is as above.
from 1989 to 1996 the size is 108