0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the diameter of a 40 foot circumference?
Circumference = pi*diameter so diameter = circumference/pi = 40/pi = 12.7324 feet (to 4 dp)
What is the diameter of a pipe with a 12 inch circumference?
It is: 12/pi = 3.8197 inches rounded to 4 decimal places
What is the circumference of a loonie?
A circumference is 4
What is the circumference of 4 in?
The circumference is 12.56 approximately
What is the circumference of a circle that is 4 ft?
A circle with a 4-foot diameter has a circumference of about 12.57 feet.
What is the OD of a ¾inch schedule 40 pipe?
Nominal pipe size 3/4" outside diamerter : 26.7 and thickness is 2.9 mm at sch 40
What is the schedule of 16 gauge pipe?
16 gauge pipe refers to the wall thickness of the pipe exclusive of its diameter.It is 0.064 inches thick, this is a steel wire gauge measurement.Pipes are typically sold by schedule numbers. A wall thickness of 0.064 inches would correspond to pipe schedule 40 for 1/8" diameter pipe (0.068"), schedule 10 for 1/4" and 3/8" pipe (0.065") and schedule 5 for pipe diameters 1/2" to 2" (0.065"). Over 2" diameter pipe, schedule 5 (the smallest wall thickness) is thicker than 16 gauge steel.
What is the pressure rating of a 2 inch. and a 4 inch schedule 40 carbon steel pipe at 70 degree Fahrenheit?
Schedule 40 welded carbon steel pipe (black) is rated at a working pressure of 150 psi. It should be printed on it. Schedule 80 welded is rated at 300 psi. If U want higher rated piping you must use seamless (not welded) pipe. Hope this helps!
What is the Wall thickness for schedule 80 4 black iron pipe?
The wall thickness of 4" Sch 40 pipe is 0.237 inches.The outer diameter is 4.5 inches and the inner diameter is 4.026 inches.
What is the diameter of a 40 foot circumference?
Circumference = pi*diameter so diameter = circumference/pi = 40/pi = 12.7324 feet (to 4 dp)
What kind of conduit does a 880 greenlee pipe bender bend emt or rigid?
A 770 Greenlee hydraulic pipe bender bend is used for rigid steel conduit from 2" to 4".
How much does 4 in schedule l copper pipe weight per foot?
4inch Schedule L Copper pipe weights 5.38 lbs/ft.
What is the circumference of a 4inch pipe?
"4 inch" would usually refer to the diameter in such cases. You can multiply that by pi (which is about 3.1416) to get the circumference.
What is the OD of 4 inch schedule pipe?
Schedule 40 Pipe O.D. through 12" Size (inch) O.D. (inch) ------ ------------ 3/4 1.050 1 1.315 1-1/4 1.660 1-1/2 1.900 2 2.375 2-1/2 2.875 3 3.500 4 4.500 5 5.563 6 6.625 8 8.625 10 10.750 12 12.750 Charts with the larger sizes are readily available online
Do you need schedule 40 4-inch PVC pipe to go from the foundation to an outside drywell that a washing machine empties into?
no 2" is enough if it's just the washing machine.
What is the outside circumference of a pipe if the inside diameter is 1.5 inches and the thickness of the pipe is .25 inch?
The pipe will have an outside diameter of 1.5+.25+.25 = 2". A pipe with an outside diameter of 2" has an outside circumference of 2"*Pi. 2"*3.142 ~= 6.284" or about 6 1/4"
What grade would a 4 drain pipe 40 feet long require?
what grade would a 4" drain pipe 40 feet long require
