0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is a hydraulic detent valve?
A spring device which maintains the spool of a directional control valve in position.
Can you put a spring in the stock of an AR-15?
Yes, that is where the recoil spring goes, push down on the detent and shove the spring into the tube
What is used to lock a valve spring on a valve?
A valve spring "keeper" or AKA a valve spring "retainer" is used to lock a valve spring to the valve.
What is Valve pocketing?
Valve pocketing is when a valve is hammering the valve seat.mostly due to miss adjusted valve spring/wrong valve spring/to strong of a valve spring or valve stem to short.Makes the valve seat deeper.
How many positions does a spring offset valve have?
how many positions does a spring offset valve have
How do you remove valve springs?
you need to compress the spring with a valve spring compressor tool, and then remove the valve keepers, and retainer.
What is the purpose of a valve spring in a petrol engine?
The valve spring is the spring that closes the valve in the engine head after the cam lobe or rocker opens it . If the valve didn't close, many things would happen , the main one being the motor would not fire .
How do you replace the trigger block detent spring on a model 12?
Find a good gunsmith or buy a book on Model 12 repair.
What is the purpose of a valve spring in an engine?
The purpose of the valve spring is to maintain contact between the components in the valve train, so the valve motion will follow the cam profile.
How do you know if your valve spring is brocken?
Your engine will probably missfire and you will not have compression in the cylinder that has the broken valve spring because your valve will stay open.
What is the right spring material quick release valve for steam application?
Spring loaded safety valve.
How do you change a 1994 explore 3-4 shift solenoid?
You have to drop the transmission pan and then drop the valve body. Make sure you remember or have the manual to know what bolts go where when you drop the valve body. Then you push in the detent valve in the middle of the solenoids and the keeper for the valve will come out and the valve will come out also.
