Want this question answered?
just so you know, all trucks used to have a full 24 volt system and cars had a 6 volt system so the design is not a nightmare. still a lot of tractors about with a 6 volt system. now a good electrician can connect a 12 volt unit to a 24 volt system if he knows what he is doing it is just a matter of knowing where to do it on a battery. you can also buy a voltage converter and wire it in. and yes you can still buy 24 light bulbs Before you go deep inside this, check the voltage on the cigarette lighter. It should only be 12 volts. The 24 volts are used in starting the truck only. By thinking this through, designing a vehicle that worked on a 24-volt electrical system would be a disaster. No one would buy it. All the current electrical components for vehicles are for 12-volt systems. Lights, gauges, radios - everything! How much trouble would it be to replace something like, say, a map light if a 24-volt lamp had to be located? Alternativley Check the powercable as many of them can work on different voltage say from 10 to 30 volts and power the gps with the correct voltage.
it draws 210 amps
Small pick up trucks use a 12 volt system. Large highway trucks use a 24 and sometimes 36 volt system, depending on the lighting load that is connected.
Change the trailer light bulbs to 24 volts and supply a 24 volt source to power them, in that order.
All you have to do is change the bulbs to 12 volts and supply the trailer with a 12 volt power source. If you leave the original 24 volt bulb in the trailer they will only glow at 1/2 of their rated wattage.
No
No.
Hook a 12 volt light to a 24 volt system and the light will burn out in seconds. You need a step-down voltage converter to do this.
the ford is a 12 volt system it has 2 batteries to help in starting . but it is a 12 volt system
Separate the 2 12 volt batteries and charge them individually.
Most cars use a 12 volt system. Most cars built before about 1956 used a 6 volt system. Some, very few, use a 24 volt system.
Connect the 12V winch to one battery, assuming the 24V system has two batteries, connected in series.
You will need a charger with 24 volt capability.
24 volt
just so you know, all trucks used to have a full 24 volt system and cars had a 6 volt system so the design is not a nightmare. still a lot of tractors about with a 6 volt system. now a good electrician can connect a 12 volt unit to a 24 volt system if he knows what he is doing it is just a matter of knowing where to do it on a battery. you can also buy a voltage converter and wire it in. and yes you can still buy 24 light bulbs Before you go deep inside this, check the voltage on the cigarette lighter. It should only be 12 volts. The 24 volts are used in starting the truck only. By thinking this through, designing a vehicle that worked on a 24-volt electrical system would be a disaster. No one would buy it. All the current electrical components for vehicles are for 12-volt systems. Lights, gauges, radios - everything! How much trouble would it be to replace something like, say, a map light if a 24-volt lamp had to be located? Alternativley Check the powercable as many of them can work on different voltage say from 10 to 30 volts and power the gps with the correct voltage.
You only need 2 12 volt batteries to get 24 volts. Join the negative post on one battery to the positive post on the other battery with a cable then connect the remaining positive and negative posts to the vehicle that has a 24 volt system.
Yes, a 12 volt battery will be damaged if charged with a 24 volt charger.