Color coding is used to identify the channel.
DIMM stands for Dual Inline Memory Module. DIMM slots are the slots on a motherboard that hold the memory modules.
Bank
DIMM stands for Dual In-line Memory Module. Have a look at the Wikipedia entry in the attached link. There is a picture on the rightihand side of the article of the DIMM slots on ta motherboard.
Are these 2 different type of expansion slots
18
They are called different names, but usually are known as memory slots. Or DIMM slots, RIMM slots, and so on.
Most likely DDR3 SDRAM. It is capable of triple-channelling, hence the three yellow label slots. :)
No, you can't use same DIMM slots for DDR2 and DDR3 due to different position of the key and interface incapability.
Variants of DIMM slots support DDR, DDR2 and DDR3 RAM. The most common types of DIMMs are: 72-pin SO-DIMM (not the same as a 72-pin SIMM), used for FPM DRAM and EDO DRAM. 100-pin DIMM, used for printer SDRAM.
Variants of DIMM slots support DDR, DDR2 and DDR3 RAM. The most common types of DIMMs are: 72-pin SO-DIMM (not the same as a 72-pin SIMM), used for FPM DRAM and EDO DRAM. 100-pin DIMM, used for printer SDRAM.
You can get memory dimms as big as 4 gigabytes and your computer will have three or four slots for a dimm.
# 4 DDR II DIMM memory slots (supports up to 4GB memory) # Supports 1.8V DDR II DIMM # Supports dual channel DDR II 667/533 DIMM # DDR2 PC5300/PC4200 # 512MB or 1GB Modules # Install like memory in each channel for Dual Channel operation # If only 2 DIMMS installed, place in same channel (slot color) for Dual Channel, if installed in adjacent slots, memory will run in single mode.