Acetylene welding is a process in which like metals are joined by heating them to their melting temperature with an oxy-acetylene flame produced by a torch.
Acetylene will change colour from orange to colourless.
When the correct amount of Oxygen is mixed with the Acetylene a NEUTRAL flame is produced. Less than that amount produces a CARBURIZING flame. Too much Oxygen creates an OXIDIZING flame. Most welding/cutting is done with a NEUTRAL flame but all flame adjustments have their purpose.
Mixing Acetylene and Oxygen in the correct proportions produces an extremely hot flame. Using just enough Oxygen so that the Acetylene is almost completely consumed in the flame is called a Neutral Flame. In most welding and cutting applications you would utilize this flame. Reducing the amount of Oxygen produces a Carburizing Flame. It is yellowish and not as hot as a Neutral Flame, but, is used in certain situations. Welding Aluminum is one. Increasing the Oxygen produces an Oxidizing Flame. It produces a flame that is pointed, colder, and louder than a Neutral Flame. It wastes fuel and isn't as efficient as a Neutral Flame.
Because of all the gas combinations used with this process Oxygen and Acetylene, in correct proportions, produce the highest flame temperature.
a flame needs a source which is provided by oxygen and acetylene
Acetylene welding is a process in which like metals are joined by heating them to their melting temperature with an oxy-acetylene flame produced by a torch.
dhjfuddidhusysu
it is 1:0.8
Acetylene will change colour from orange to colourless.
red
When the correct amount of Oxygen is mixed with the Acetylene a NEUTRAL flame is produced. Less than that amount produces a CARBURIZING flame. Too much Oxygen creates an OXIDIZING flame. Most welding/cutting is done with a NEUTRAL flame but all flame adjustments have their purpose.
6,300 degrees fahrenheit which is the same temperature as the oxy-acetylene cutting torch flame and in fact the oxy-acetylene cutting torch flame looks exactly the same as the rocket engine flame. Vincent Majerowicz
Ozone and acetylene
natural flame using a mixture of one-to-one ratio of acetylene and oxygen.
Mixing Acetylene and Oxygen in the correct proportions produces an extremely hot flame. Using just enough Oxygen so that the Acetylene is almost completely consumed in the flame is called a Neutral Flame. In most welding and cutting applications you would utilize this flame. Reducing the amount of Oxygen produces a Carburizing Flame. It is yellowish and not as hot as a Neutral Flame, but, is used in certain situations. Welding Aluminum is one. Increasing the Oxygen produces an Oxidizing Flame. It produces a flame that is pointed, colder, and louder than a Neutral Flame. It wastes fuel and isn't as efficient as a Neutral Flame.
Calcium Carbide is used in "Carbide Lamps". Water, added dropwise to Calcium Carbide yields acetylene plus calcium hydroxide. Acetylene is extremely flammable, giving a colorless flame. The calcium hydroxide present gives the flame its visibility. Calcium Carbide is used in "Carbide Lamps". Water, added dropwise to Calcium Carbide yields acetylene plus calcium hydroxide. Acetylene is extremely flammable, giving a colorless flame. The calcium hydroxide present gives the flame its visibility.