10:1
http://www.mazdausa.com/MusaWeb/displayPage.action?pageParameter=modelsSpecs&vehicleCode=RX8&bhcp=1
10:1 - 12:1 through that range is fine
The mazda rx8 is a car from the brand mazda. The rx8 has a rotary engine, so the "r" is defined as rotary. The x could be "Xperiment". The 8 is a catchy number and is after the 6 and 7 models.
The current rotary engine displaces 1.3 liters. 1.3 liters in a rotary is approximately equal to 2.6 liters of piston engine
It is in fact neither. It is a rotary type of engine, there is nothing v about it.
For all I know, for the RX8, about 1k or 10k of them were made a V6. All though if I remember correctley, one of Mazda's cars were not even produced with a rotary engine and I think it was called the Comet.
They have not stopped. Mazda still uses the NSU Wankel twin rotor engine to power the RX8.
Typically with the Mazda RX8 Rotary engine vibration at revs as high as 6000 is down to engine damage suffered when oil was low. Your engine requires rebuild or renewal. Vibration at idle only is typically engine mounts, a know fault many dealers are aware of.
Both the Mazda RX7 and RX8 use a style of engine known as the Wankel Rotary engine. These engines are typically small but produce larger amounts of power than a standard cylinder based engine of the same size. See related links for a Wikipedia article on the Wankel Rotary Engine The RX8 is also special and noticeable for its looks (Well the 2009 one is) and the smoothness of the engine. The RX8 also uses a door style called 'Suicide Doors' which means both doors open in separate directions. It also has a good layout: Front engined rear wheel drive! It is a coupe and a four door saloon mixed together!
I have a friend with 170,000 miles and he still drives it daily, I have another friend replacing his engine at 50,000 miles.
There is no "timing belt" There is also no camshaft nor any valves. The rotary engine does not use any of the above.
Do an internet on a Mazda RX7 or RX8... other than that ....it's basically an airplane engine..... --------------------------------------------------------------------------------------------------------------- A rotary engine, or formly known as the "wankel" engine was created/invented by Felix Wankel back in the 1920s i believe, prototype was designed an released in 1959. Mazda well know for the RX(Rotary Experiment) Gen cars 1-8. There are a few kinds of rotary engines, the ones in airplanes, and the ones used in cars/trucks. The basic rotary engine from a car IE Rx7. has a 13b rotary engine, which is a 2 rotor model. The rotary engine , instead of a traditional piston engine does not go up an down, instead goes in circular motion (which allows it to get way more RPMs). there are plenty of rotary engines 12a,13b,20b, and 26b(which is hard to come close too...AND ALOT OF $$$$$) thats basically a lil about the rotary engine!!!
yes. look up supercharged Mazda rx8 on youtube Check out Pettit Racing on Google. 10 - 12 PSI of boost in a RX8 is about 330 - 350 RWHP. --- check out rx8club.com --- lots of good information on there to find out about your Mazda rx8, I have an '05 that I'm building up for turbo, everything you need to know or need to search about is posted about there...