Want this question answered?
It uses hydralic fluid not transmission fluid and takes about 5 gallons. It uses hydralic fluid not transmission fluid and takes about 5 gallons.
model 600 Bobcat hydraulic filter in in front of the engine down at the bottom of engine compartment. It's a cartridge type #946865.
Yhe hydraulic fluid is low
The hydraulic equipment is most likely an aftermarket item, and not installed by Ford. There may be a few different places where your hydraulic oil reservoir could be. It may be possible that the fuel tank was split into separate tanks for fuel and hydraulic fluid. There may be an exposed hydraulic oil tank between the rear of the cab and the apparatus which is hydraulically operated. Or, it may be under the frame, towards the rear of the vehicle.
Not very likely unless the Grizzly chokes on the Bobcat while eating it. Bobcat- average weight 21 lbs. Male Grizzly- average weight, 600 lbs.
There are 19,200 fluid ounces in 600 quarts.
about 20.27 fluid ounces
Brake Fluid.
600 gallons = 76,800 fluid ounces
600 US fluid ounces is 17.7441 liters.
there is no relay, fan is driven by hydraulic fluid, not an electric motor. bottom of the fan assy there is a solenoid... one hydraulic hose is connected to it... go to a good mechanic and the solenoid will cost you about $200 + labor... otherwise you will pay for whole assy (frame, solenoid and fan)... $600+ plus labor...
600 mL is about 20.288 US fluid ounces.