0
For 230 kv application, Its around 75k/MVar
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What is the difference between static var compensator and static var cenerator?
there is no such thing as static var cenerator but if you meant static var generator then the difference is the same. it is one in the same thing, a combination or inductance and capitance to generate either reactive inductance or capacitive reactance.
How Static var compensator different from other FACT devices?
Static Var Compensators are the most important FACTS devices, SVc's have high accuracy, availability and fast response and therefore give better steady state and transient voltage control compared to classical shunt compensation. SVC's require large inductive and capacitive components and occupy a larger space than STATCOMs. STATCOMs give higher reactive oututs at low voltages compared to SVCs.
What is dynamic var compensation?
The reactive Power Compensation system that is Automatically able to adjust its reactive Power so that concerned system Power Factor is maintained within the desirable limits (Near Unity) is known as "Dynamic VAR Compnesation" system. The Present day technology, known type of "Dynamic VAR Compensation" systems are: Conventional Method: * Contactor switched Capacitor Banks controlled by "Automatic PF controller / regulator". Also popularly known as "APFC system". Here capacitors are switched on/off depending upon the need automatically. Capacitors switched are frequently connected with series reactors for controlling harmonics through it or for switching transient suppression. Static VAR compensation Method: * Thyristor switched Capacitor Banks controlled by "Automatic PF controller / regulator". Also popularly known as "TSC system" or "RTPFC System (Real time PF correction)". Normally, the compensation time of such systems are much faster than conventional method. Here too, capacitor banks are frequently fitted with series reactors to control harmonics. The "zero differential voltage switching" of capacitor banks normally controls the switching transients. * STATCON (Static Condenser) or STATCOM (Static Synchronous Compensator) is comparatively a new technology and offers smooth and fast reactive power (VAR) compensation by usage of Power Electronics based technology. Normally, the MOSFETs or IGBTs based inverter using sinusoidal PWM technology achieves the desired compensation either in capacitive and inductive reactive power. * Thyristorised Static VAR compensator: This technology uses the thyristor switched or phase angle controlled reactors that are put in shunt with fixed capacitor. This is fairly an old technology and slowly due to economics and technology advantage of TSC system or STATCON / STATCOM system is not used recently. All the above mentioned systems can be termed as "Dynamic VAR compensation" systems. The "Fixed VAR compensation" which normally uses fixed capacitors / inductors that are permanantly connected on mains supply system (sometimes manually switched On/off) should not be confused as "Static VAR compensation" as word "Static" is used as adjective, which is for defining "type of technology" usage and not for "VAR".
How do you use if and for in pascal together?
That depends.This is an exampleIF var=1 then beginfor var=1 to 5 dowriteln(var);end {of then}else writeln(var);
How do you write a vb script code to print a pyramid of numbers?
Dont know pyramid but I have code for writting a Triangle- For i=1 to 5 For j=1 to i var= var& " *" Next var=var & vbnewline Next Msgbox var
What is the full form of VAR in static VAR compensator?
Volt Ampere Reactive
What is the difference between static var compensator and static var cenerator?
there is no such thing as static var cenerator but if you meant static var generator then the difference is the same. it is one in the same thing, a combination or inductance and capitance to generate either reactive inductance or capacitive reactance.
What has the author Papadouris written?
Papadouris has written: 'Investigation of an advanced static VAr compensator'
How do you compute data for modelling static var compensator?
To compute static VAR compensation, you need to know the original power factor, the desired power factor, the real power delived to the system and the equivalent load model represented as r+jw. This will enable the total var compensation, therefore, enabling the calculation of C to provide the leading PF.
What is the input data for modeling of static var compensator?
To compute static VAR compensation, you need to know the original power factor, the desired power factor, the real power delived to the system and the equivalent load model represented as r+jw. This will enable the total var compensation, therefore, enabling the calculation of C to provide the leading PF.
How do you make program from algorithm of particle swarm optimization for voltage stability in matlab?
To make a program from an algorithm of particle swarm optimization for voltage stability you need a method for finding an optimal location for Thyristor Controlled Series Compensator(TCSC)and Static Var Compensator(SVC).
How Static var compensator different from other FACT devices?
Static Var Compensators are the most important FACTS devices, SVc's have high accuracy, availability and fast response and therefore give better steady state and transient voltage control compared to classical shunt compensation. SVC's require large inductive and capacitive components and occupy a larger space than STATCOMs. STATCOMs give higher reactive oututs at low voltages compared to SVCs.
What is dynamic var compensation?
The reactive Power Compensation system that is Automatically able to adjust its reactive Power so that concerned system Power Factor is maintained within the desirable limits (Near Unity) is known as "Dynamic VAR Compnesation" system. The Present day technology, known type of "Dynamic VAR Compensation" systems are: Conventional Method: * Contactor switched Capacitor Banks controlled by "Automatic PF controller / regulator". Also popularly known as "APFC system". Here capacitors are switched on/off depending upon the need automatically. Capacitors switched are frequently connected with series reactors for controlling harmonics through it or for switching transient suppression. Static VAR compensation Method: * Thyristor switched Capacitor Banks controlled by "Automatic PF controller / regulator". Also popularly known as "TSC system" or "RTPFC System (Real time PF correction)". Normally, the compensation time of such systems are much faster than conventional method. Here too, capacitor banks are frequently fitted with series reactors to control harmonics. The "zero differential voltage switching" of capacitor banks normally controls the switching transients. * STATCON (Static Condenser) or STATCOM (Static Synchronous Compensator) is comparatively a new technology and offers smooth and fast reactive power (VAR) compensation by usage of Power Electronics based technology. Normally, the MOSFETs or IGBTs based inverter using sinusoidal PWM technology achieves the desired compensation either in capacitive and inductive reactive power. * Thyristorised Static VAR compensator: This technology uses the thyristor switched or phase angle controlled reactors that are put in shunt with fixed capacitor. This is fairly an old technology and slowly due to economics and technology advantage of TSC system or STATCON / STATCOM system is not used recently. All the above mentioned systems can be termed as "Dynamic VAR compensation" systems. The "Fixed VAR compensation" which normally uses fixed capacitors / inductors that are permanantly connected on mains supply system (sometimes manually switched On/off) should not be confused as "Static VAR compensation" as word "Static" is used as adjective, which is for defining "type of technology" usage and not for "VAR".
What is the meaning of Var -var vachne marathi senten?
What is the meaning of var-var vachne(marathi sent) in marathi
What is an airsoft compensator?
A compensator for looks only. Air soft "weapons" don't generate enough recoil for one to be needed.
What is the abbreviation for variant?
Var or Var.
Why Glock 34 does not function when compensator is added on?
The compensator is causing the action to bind, or the additional weight is preventing the slide from moving freely.
