The engine cylinders are numbered 1 , 2 , 3 , 4 going from front to rear on the passenger side of the engine and 5 , 6 , 7 , 8 going from front to rear on the drivers side of the engine The spark plug firing order is ( 1 - 3 - 7 - 2 - 6 - 5 - 4 - 8 ) and the distributor rotor turns COUNTERCLOCKWISE The marked # 1 position on the distributor cap is installed facing to the rear and slightly towards the drivers side of the engine
Rear 1,3,5 Front 2,4,6
The stock 1990 F-150 with the Windsor engine gets about 15 miles per gallon on the highway. The Windsor engine can be modified to get about 400 horsepower, but is rated at about 160 horsepower as of 1990.
As you stand in front of the car looking at the engine, Cylinder 1 is in front of your left hand, then 3, then 5, then 7. The cylinders at the back, by the firewall, are 2, 4, 6 8. from your left to your right - ie from the passenger side to the drivers side. Richard
# 1 cylinder is the front cylinder on the passenger side of the engine
The 1990 Stanza only came with a 4 sylinder.
either a 2.4 4 cylinder or 4.0 liter 6 cylinder engine
The factory engine sizes are a 2.5L four cylinder and a 4.0L six cylinder.
Six cylinder, on the front behind the engine mount. Four cylinder, rear of the engine under the exhaust manifold.
get a different engine
On your 4.9 liter / 300 cubic inch straight six cylinder engine # 1 cylinder is at the front of the engine nearest the radiator
4.0 L inline 6 cylinder and 2.5 L inline 4 cylinder.
As you are facing the Front of the engine they are: Leftside 1,2,3,4Rightside 5,6,7,8