Wires and cables are all tested and approved for certain locations by CSA or UL testing laboratories. These products are tested to destruction to see what the most extreme conditions that the product can operate under. Home construction cables are designed by the manufacturer to used in concealed areas such as in walls. With proper support stapling within the wall, the extra protection of the insulation and outer sheaths of the cable makes this possible. Lamp cord is designed to be exposed and is strictly designed to bring a voltage source from the wall receptacle to the lamp. Since lamp cord has a small ampacity, applying a large current to it could heat its insulation to a high enough temperature that the insulation could become brittle and break off. This would lead to a short circuit within the wall and if close to combustible material in the wall a fire could start. Use the correct conductors for the electrical projects that you plan to do.
Given the proper lighting and locale, a snake may resemble a lamp cord.
Lamp cord is #18 in size and is rated for 10 amps. This type of wire is strictly for use on lamps only and not to be used for power wiring.
Yes, lamp cord is rated in the 300 volt wire classification. This means that the cord is approved for use up to a maximum of 300 volts.
The ribbed wire on a lamp cord is the neutral wire. On an extension cord there is no rib but the neutral wire is white in colour.
An indoor extension cord is usually made from the same material that your lamp cords are made from. An outside cord has an outer jacket that is usually round in shape and has the electrical data printed on the length of the cord.
The cord is attached under the shade and runs outside the lamp along the back
Given the proper lighting and locale, a snake may resemble a lamp cord.
Are you saying that you plug in a lamp and another lamp on that extension cord goes dimmer? If so then the extension cord wire is of a smll guage size and causing a voltage drop from the outlet to the cord output.
No
Inside a lava lamp there is wax.
Chances are if you check ebay you can find exactly what you are looking for. Many companies are looking to sell used and new lamp cords. A lamp cord is a pretty easy piece to find, you can take a trip to your local hardware store. You can also find the lamp cord online at Ebay or Amazon.com
Parallel Pair
Lamp cord is #18 in size and is rated for 10 amps. This type of wire is strictly for use on lamps only and not to be used for power wiring.
yes.
A power cord for a lamp can be bought at a local store, like Home Depot, or Walmart. They are really inexpensive about 10$ where I live or less, I have not really checked.
A: absolutely not lamps needs current a long cord introduce IXR drop making less current for the lamp to use it
How to change the daytime running lamp on 2008 GMC Acadia