38 to 39 API So taking 38,5 API this is 0,8324 kg / cbm or 7,574 Barrel per mt.
Density: 0.625 to 0.660g/cm3, liquid
The properties of Brent Crude oil are the same properties of any crude oil, density, viscosity, and solubility. Although Brent is LCO (light crude oil).
Liquefied Petroleum Gas or LPG is a mixture of various hydrocarbons. It has a density of 1.9 kg/m3 to 2.1 kg/m3.
How to calculate the specific gravity of a petroleum product involves using the ratio of the specific product density to that of water. This type of calculation is always determined at 60-degrees Fahrenheit.
at a guess 1,250 litres, petroleum products generally have a density of 0.8kg/litre
Density: 0.625 to 0.660g/cm3, liquid
Petroleum is a very complex mixture, not a compound.The density is very variable: from 0,8 g/cm3 to more than 1 g/cm3.
The properties of Brent Crude oil are the same properties of any crude oil, density, viscosity, and solubility. Although Brent is LCO (light crude oil).
The density of petroleum diesel is about 0.85 kg/l whereas petrol (gasoline) has a density of about 0.72 kg/l, about 15% less
The American Petroleum Institute (API) scale on hydrometers is an arbitrary scale based on Relative Density (Specific Gravity) where - API = (141.5 divided by the Relative Density at 60oF) - 131.5
Liquefied Petroleum Gas or LPG is a mixture of various hydrocarbons. It has a density of 1.9 kg/m3 to 2.1 kg/m3.
The density of petroleum diesel fuel is about 0.85 kilograms per litre (7.09 pounds per gallon).
The density of petroleum diesel is about 0.85 kg/l
The density of petroleum diesel is about 0.85 kg/l, sooo about 34kg.
Energy density of petrol products are low when compared to hydrogen and other fuels.
Petroleum is less dense than water, which allows it to float on top of water. Additionally, petroleum is hydrophobic, meaning it repels water and does not mix with it. These properties enable the formation of a layer of petroleum on the surface of water.
How to calculate the specific gravity of a petroleum product involves using the ratio of the specific product density to that of water. This type of calculation is always determined at 60-degrees Fahrenheit.