Please see:
What_is_the_difference_between_a_hub_and_a_switch
Hubs segregate packets because hubs are used as switches. Through a VLAN, hubs, when used as switches, can easily segregate incoming and outgoing traffic.
Switches increase the number of collision domains in the network.
As soon as possible. Switches are much more efficient than hubs because hubs send the data to all the connect nodes, unlike switches that only forward packets to the appropriate node. Hubs cause a lot of packet collisions which reduces the efficiency of your network. __________________ I was going to say "Now, because switches are so cheap". But your answer is better.
There is no magazine that is specific to network hubs and switches. However, PC Magazine is a computer magazine available on newsstands and MozillaQuest (http://mozillaquest.com/index.html) is an online magazine that may include articles and other information on network hubs and switches.
Switches, hubs...
It is easier to scan a network connected by hubs than by switches because a switch can limit traffic between subnets, whereas a hub cannot, and would therefore require more overhead to facilitate a scan.
hubs, switches or routers.
layer 3 switches require ip address but hub do not require
cabling
Hubs are a physical layer (layer 1) device; most switches operate at the Data Link layer (Layer 2) of the OSI model.
See related link
Routers operate at layer 3. LAN switches operate at layer 2. Ethernet hubs operate at layer 1.