One has 3 one has 8
The difference between single port RAM and dual port RAM is that single port RAM can be accessed at one address at one time, thus you can read/write only one memory cell during each clock cycle. Dual port RAM has ability to simultaneously read and write different memory cells at different addresses. SPRAM uses a 6 transistor basic ram cell, while the dual port ram cell uses 8 transistor cell for memory. so the area of spram is much smaller than the area of dpram cell. To gain the advantages of both spram (less area) and dpram ( high speed) Pseudo dual port ram is introduced. which can read and write the data in the same clock, using rising and falling edges for the operations respectively, and using spram memory cell for the storage of data.
In a word ...NO !
Dual port ROM is a one, where data from two different address's can be read simultaneously, unlike single port where data from only one address can be read.
It's not possible.
The dual port is a separate feature from full-duplex. Dual porting provides a redundant data path, which performs two functions: 1) Allows the drive to operate at 6GB/s instead of the regular 3GB/s (port combining for superior performance). 2) Allows the drive to continue functioning if and when one port becomes nonfunctional (eliminates single point of failure). If dual porting were the feature that provided full duplex, neither of these functions would work, however all SAS serial interfaces are inherently full-duplex. Note also that SATA does not support dual ports or full duplex, even on a controller that supports both SATA and SAS drives. You must use SAS drives to have these features.
Dual port RAM usually have 2 full ports i.e. you can read, write and have all the controls twice. 2 port RAM separate only the read and the write ports and their matching controls (WE, OE etc), i.e. you can only read and write in the same time. In both genres, you shouldn't access the same address simultaneously.
Its a single cam.. it says " 2.0 Split Cam on the cover of the engine... A dual cam would say " 16V Zetec" on the engine cover.
Single port engine: Solex 30PICT. Dual port engine: Solex 34PICT. Alternately, Solex 31PICT with an adapter.
well i don't think the question given is a correct question because like give the difference between the keyboard port and the usb port
Terminal provides infrastructure for the port to handle containers.
yes
The telephone line is the medium. The port is the connection point.