0
EPROM (Electronic Programmable Read Only Memory) chips can be erased if it needs to be updated or fixed. It can be erased electronically only These are comparatively expensive than PROMs. PROM (Programmable Read Only Memory) chips are relatively once written and to rewrite them you need to replace entire data on it. These are relatively less costly.
PROM is the Programmable ROM that allows the user to store data. an instrument called a PROM programmer does the storing by 'burning in', once the data has been burned, the data cannot be erased!
On the other hand, an EPROM allows the data to be erased by the help of uv lights. i.e EPROM is uv light erasable and electrically reprogrammable.
Wiki User
∙ 13y ago
Wiki User
∙ 14y agoPROM means Programmable Read Only Memory, while ROM means Read Only Memory.
The difference is simply the method of programmability. The ROM is programmed by the chip maker, using one of the mask layers, while the PROM can be programmed with a programmer, usually by "blowing fuses", but sometimes by other means.
The programming of a PROM is generally considered a "one way" or "one time" operation.
The programming of a ROM is a mass production type of operation, intended for thousands or more of the same device programming.
PROMs intended for reuse must be eraseable. The EPROM (Eraseable Programmable Read Only Memory) is generally erased with strong ultraviolet light, while the EEPROM (Electrically Eraseable Programmable Read Only Memory), or the EAPROM (Eletrically Alterable Programmable Read Only Memory) can be changed in situ. FLASH is the latter type.
Add your answer:
Earn +20 pts
What is the classification of ROMs?
Rom :- Read Only Memory. The storage of data and instructions in Rom is permanent. It does not depend on the power supply. The memory which does not lose its content when power is turned off is known as non-volatile memory. There are three types of Rom :- Prom = Programmable read only memory Eprom= Erasable Prom EEprom=Electrically erasable prom
What type of rom it is sim card?
A SIM card (subscriber identity module) is similar to an EPROM (erasable-programmable ROM), with anywhere between 8 KB to 256 KB of storage capacity.
What is the difference between technology and process?
what is the difference between license and patent
What is the difference between an assembler and a translator?
what is the difference between an assembler and the translator
What is the Difference between HVAC and AHU?
What is difference between hvac and ahu
What are the 2 main types of ROM called?
PROM (programable read only memory) EPROM (eraseable programable read only memory) PROM (programable read only memory) EPROM (eraseable programable read only memory) PROM (programable read only memory) EPROM (eraseable programable read only memory) PROM (programable read only memory) EPROM (eraseable programable read only memory) PROM (programable read only memory) EPROM (eraseable programable read only memory) PROM (programable read only memory) EPROM (eraseable programable read only memory)
What are the kind of ROM?
ROM can be broadly of three types, namely PROM (programmable read only memory), EPROM (erasable PROM), and EEPROM (electrically EPROM). Many versions of EEPROMs are available.
What are examples of primary memory?
examples of primary memory are RAM, ROM, PROM, EPROM , etc.....
What is ROM eprom eeprom ram?
Here ya go found this on the Internet for you: Acronym for erasable programmable read-only memory, and pronounced ee-prom, EPROM is a special type of memory that retains its contents until it is exposed to ultraviolet light. The ultraviolet light clears its contents, making it possible to reprogram the memory. To write to and erase an EPROM, you need a special device called a PROMprogrammer or PROM burner. An EPROM differs from a PROM in that a PROM can be written to only once and cannot be erased. EPROMs are used widely in personal computers because they enable the manufacturer to change the contents of the PROM before the computer is actually shipped. This means that bugs can be removed and new versions installed shortly before delivery.
Why eeprom is better than eprom?
The advantages were "accumulative", so a history of the development of ROM is best to explain them: First came ROM - Read-Only Memory. Unlike RAM, ROM could not be written to but had the advantage that it was non-volatile which means its contents are permanently there, they do not disappear when power is removed. But the contents were put there in the factory, you could not "program" the contents yourself. Then came PROM - Programmable ROM. With PROM you could, if you owned a programming machine or "programmer", set the contents of the PROM yourself, one time, before your put it in the electronic circuit board. Next came EPROM - Eraseable PROM - with EPROM if you needed too you could take the EPROM out of the circuit board, put it in an EPROM eraser to reset the contents, and then program it again in the programmer. The EPROM eraser was a small box that the EPROM was placed inside. When the box was turned on ultra-violet light shined into the EPROM thorough a small "window" on the top of each EPROM, erasing the contents. Finally came EEPROM or E2PROM - Electronically Erasable PROM. With EEPROM you didn't need the eraser or the programmer! The EEPROM can be programmed, again and again while it is on the circuit board, by sending a sequence of signals to certain pins on the device.
What is the difference between 8051 8031 8751?
The difference is that those MCUs that start with 80 are romless, those with 87 use EPROM erasable by light
How can be erase data stored in ROM?
A standard ROM or PROM cannot be erased, only erasable PROM can be erased. It is done with either UV light or electronically depending on the type of EPROM.
What is the explanation for the four types of ROM?
ROM- read only memory.. types are masked rom, prom, eprom and eeprom.
What is the Difference between prom and RAM?
PROM is "Programmable Read Only Memory" RAM is "Random Access Memory" Prom is used to retain data even when the computer is turned off. RAM is used by the computer to run applications when the computer is running. RAM is high speed memory that can be read/written while the computer is running. Applications and data are loaded into RAM every time your computer is turned on. PROM, ROM, EPROM are all versions of memory that typically contain the same data every time the computer is turned on.
What is the classification of ROMs?
Rom :- Read Only Memory. The storage of data and instructions in Rom is permanent. It does not depend on the power supply. The memory which does not lose its content when power is turned off is known as non-volatile memory. There are three types of Rom :- Prom = Programmable read only memory Eprom= Erasable Prom EEprom=Electrically erasable prom
What is the difference between a grad dress and a prom dress?
The grad dress is usually white. The prom dress is usually more flashy and sexier.
A ROM chip that can be programmed over and over using ultraviolet is known as what?
EPROM or Erasable Programmable Read Only Memory was invented by Engr. Dov Frohman. It is a ROM-type chip that can hold data from 10-20 years. It is different from PROM because it can be programmed more than once. An EPROM programming is erased only through exposure to ultra violet light. The EPROM is configured or reconfigured using an EPROM programmer.
