Simplistically, 8 cylinder engines have a bigger fuel consumption than 6 cylinder engine because you burn fuel in two more cylinders. But, in the same time, will give you more thrust because you use that extra burned fuel to generate more thrust by moving more pistons. The is very basic. The number of cylinders are not the only factor determining the fuel consumption and thrust of an engine but in general the above statement is true.
on left side pasengers side,in back of engine way down under alternater!! between firewall and engine,
The oil pan is bolted to the bottom of the engine
difference schematic diagram between carnot heat engine and heat engine
Basically you just pull the 6 cylinder out and bolt the 8 cylinder in. Several more steps than that are required to do it right tho. Depending on the year of the vehicle, you could need a new computer and wiring harness, as well as a new or upgraded transmission to handle the increased power output of the bigger engine. The swap could be as simple as taking one out and putting the new one in, bolting it up, and putting in the required intake and exhaust components. But 90% of the time, its never that simple.
difference between 2.5 and 3 liter engine is .5 of a liter
What are the differences between a 350 and a 454 engine?
The main difference between a diesel and a steam engine is the diesel engine is an internal combustion and the steam engine is external combustion.
4 cylinder engine 4qts V6 engine with filter change 4qts Inline 6cylinder engine 6qts
same
a engine runs a machine
No The reluctor ring, and the piece that sticks into the engine will be different except on the 4.3 engine. Then only the reluctor ring will be wrong.
Should be in a removable housing at the engine end of the upper radiator hose