wheel bearing is on the alxewhere the tire fits thecv joint is aaxle thatcomeoff the control arm and fits in to the transmission it has a rubber boot that cover it also
A wheel bearing could.
Yes, there is no difference between the bearing slot in any scooter wheel. Any bearing will fit any wheel.
An extremely loose wheel bearing can cause the cv joint to be damaged.
Is the wheel bearing on the front or the rear ????.. There is a big difference ...
bad wheeling bearing
Axle shaft u joint or the steering knuckle.
Loose or bentsteering or suspension component such as tie rod, wheel bearing,or ball joint. Alignment not in specs.Loose or bentsteering or suspension component such as tie rod, wheel bearing,or ball joint. Alignment not in specs.
They're the same thing. What I mean is that the bearing lies between the axle and the hub, and the wheel is bolted to the hub.
You can raise the vehicle front or rear and move the wheel back and forth and up and down, so as to feel for play. Excessive play in the wheel indicates loose components, whether a wheel bearing or tie rod or ball joint. If there is excessive play moving the wheel left and right, then could be a tie rod. If there is excessive play up and down, then could be a ball joint. If there is excessive play all around, then could be the wheel bearing.
If you suspect a flat spot on a tire examine the tire closely. You should be able to see a flat spot. To determine if your car has a bad wheel bearing rotate the wheel. A bad wheel bearing will often make a grinding sound as well as feeling rough as you turn the wheel. A bad wheel bearing may also shake or wiggle. It will also cause a car shaking problem.
first take wheel off, remove brake caliper,brake rotor then 4 bolts behind the front wheel bearing assy. then pull front axle out with wheel bearing attached then change u-joint and reassemble. PS wheel bearing assy can be stubborn so plenty of lubricant is needed to break loose
Possibly worn CVC joint, loose wheel bearing or wheel. Have this looked at ASAP.