There are two technologies in the way the keys of a keyboard make contact: foil contact and metal contact. The foil contact keyboard has two layers of foil that when you press a key makes a contact and close a circuit. When it's released a small spring under keycap raises the key. The metal contact keyboard uses two metal plates to make contact, and again a spring under keycap raises the key when it's released. Metal contact keyboards give the keystroke clear and definitive contact.
in friction type the bearing metal is direct contact with shaft metal, but in the antifiction the rolling element is contact with the bearing races only.
Via is used for connecting successive metal layers like metal 1 to metal 3 etc, whereas contact is used to connect the poly-silicon to the metal 1 for external pin connections
metal is a substance and medal is something made out of metal
metal detector is sensor
bronze and gun metal
no
Smelting extracts a metal from its ore. Melting liquifies the metal.
The keyboard contact sheets are made from contact mylar (aka space blanket) open cell polyurethane foam and .007-.01 clear stiff plastic..
In any distribution panel there are individual bars for each termination. The ground buss is in direct contact with the metal enclosure. The neutral is isolated from the metal enclosure. The only place where the two come into contact with each other is where a bonding screw protrudes through the neutral bar and into the metal enclosure.
carbon is a non metal whereas lithium is a metal.
A metal pan will not attract iron but a magnet does.
A hard metal will act as an abrasive on a soft metal if they come in direct contact. The hard metal will cut grooves in the soft metal.