By transforming your biometrics - like your eyes and face - into a single touchless ID, you can rely on CLEAR for a faster, safer experience, every time. CLEAR keeps you moving, without contact or crowds. Find CLEAR in 65+ airports, sports venues.
cutt.ly/VjxULaY
The base coat is the color.
The clear coat is the glossy protective finish.
Clear coat is applied over a base color for the gloss
with your hands!
Yeah but it wont be as shiny...
sure, it is called bace coat/clear coat system and they have been doing it since 1986 ish. Spray your bace till covered let it dry tack cloth the finish then spray your clear, follow directions on can I think the question is whether or not to mix the base coat WITH the clear before applying. It will defeat the purpose of the clear coat as a UV protectant to the base coat. You can do it but I certainly would not recommend it.
If it is single stage paint then no if base coat then yes....
If there are scratches on the surface before you clear coat, the clear will not come out smooth. If you are spraying new clear coat over an old clear coat, the entire surface must be wet sanded with at least a 600 grit wet/dry paper so the surface is rough enough to accept the clear. If you are spraying new clear over an new base coat, the same techinque for prepping the surface will be necessary if the base coat has dried.
Usually there is a base coat of a solid colour, a coat of the chameleon paint, and then a clear coat
balls
You can, it depends what you expect in terms of finish quality. You must also consider that there is not much difference in price when it comes to spraying paint and clear coat then clear coat only you still have to sand paint buff the only difference is maybe one or two hours clear coat needs to be removed to apply new clear coat, clear coat also take a great amount of work after drying to achieve oem finish. The answer is yes however having gone that far might as well refresh it unless you just find the clear does not suit your vehicle but that is unlikely.
well what i do is i put a top coat on then my base coat with little designs usually then i put a clear coat not to thick though! hope that helps!
You should leave it to dry a couple of days in a dry environment and at atleast 70 degrees celsius.
What is the difference between a rain coat and a rain slicker?