0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is tensile load?
Think of a tensile load as a "pulling" force. A tensile load is the only type of load that can be taken by a rope, for instance.
What is the difference between tensile strength and tensile modulus?
Tensile strength is the ultimate capacity of the material to resist a tensile load regardless of deflection.Tensile modulus also known as Young's modulus, is a measure of the stiffness of an isotropic elastic material. It is defined as the ratio of the uniaxial stress over the uniaxial strain. It is determined from the slope of a stress-strain curve traced during tensile tests conducted on a sample of the material.
What is the difference between tensile stress and breaking stress?
tensile stress is due to just the tension in the load whereas breaking stress can be due to breaking,shearing or compression!
What is the difference between a load-controlled tensile test and a displacement-controlled tensile test?
If the test is set to load-control , it means that the stress will not drop once the fracture become unstable. In displacement control the stress may drop at unstable fracture.
What is the difference between axial load and radial load?
Axial load (or thrust load) is a force applied parallel to the longitudinal axis, whereas, a radial load is a force applied transverse to this longitudinal axis.
What is tensile failure?
It is a failure caused by a load in tension; that is, a force that stretches the material. For example, if you pull a beam along its axis and stetch it until it breaks, that is a tensile failure.
What is the difference between a dead load and a live load?
A dead load is a permanent force, acting on a structure.This includes the weight of the structure itself.A live load is a changing, or non-permanent force acting on a structure.This includes the force of the wind and the weight of things that are in or on a structure.
What is the difference between shock load and gradually applied loads and suddenly applied Load?
The only difference between a shock load and a gradually applied load is something called an impulse; defined as the integral of a force with respect to time. When a force is applied to a rigid body it changes the momentum of that body. A small force applied for a long time can produce the same momentum change as a large force applied briefly, because it is the product of the force and the time for which it is applied that is important.
What is tensile test?
A sample is tested using a tensile test machine by loading it in a direction along its axis. The load is measured with a load cell, and when the sample breaks its tensile strength is determined by dividing the failure load by its area.
What is the difference between stainless bolt and high tensil bolt?
Well obviously the stainless bolt offers better corrosion protection, however, where bolts need to be really tight or have great tensile load on them(being pulled apart) high tensile should be used instead.
What does it mean by hardness in tensile?
For metals, hardness is a measure of the deformation of a surface of the metal when subjected to a normal compressive force with a ball or other shape. Its units are arbitrary. Tensile strength is a measure of the maximum tensile load per unit of cross sectional area a material can withstand without breaking. Units are force/area.
Difference between voltage and emf?
'Voltage' is simply another term for 'potential difference', and an electromotive force is the open-circuit, or no-load, potential difference of a source such as a battery or generator.
