The difference is very technical... One of the devices, called the "master", is in control of the data transmission, the other one "obeys". All you really need to know is that if one device is the master, the other must be the slave. It doesn't matter much which is which.
Primary master and secondary master
what is the difference between drive and machine
there is no difference.
Four Wheel Drive: When engaged, the power is applied to all four wheels. Low: Some four wheel drive systems have a high and low setting. at Low setting speed is compromised for higher torque and vice versa.
The difference between a drive and disk is that a drive is used to read a disk whether it be a floppy disk or a compact disk.
There is no difference. Flash drive, pen drive, and thumb drive are all interchangeable terms.
You have to install the master cylinder that is compatible with your truck otherwise if will not work. There is really no difference in a 2wd & 4wd when it comes to the master cylinder.
Hard Drive configuration is used to define the Slave and master Hard Drive. When we are attaching more than one hard drive the configuration is used. Configuration is done by jumper setting which is available in back side of hard drive...1st two pins for master hard drive and last pins are slave..
The function of cable select jumper setting is to let the cable select which drive takes priority ("master") and which one comes after ("slave").
lol really
Some IDE drives have a master/slave jumper, but a significant number of IDE drives defaulted to a "cable select" setting where the drive would determine for itself whether it was the master or the slave by which of the two sockets on the cable it was plugged into.
There is no difference