0
What else can I help you with?
What is the difference between monel valves and piston valves?
Monel is a hard-wearing nickel and copper alloy. Piston valves in brass intruments may often be made of monel, amongst other materials including stainless steel.
What is the difference between MS and SS in WiMAX system?
what is difference between mild steel and stainless steel
How can you tell the difference between steel and aluminium?
steel rusts
What is the difference between density of stainless steel and normal steel?
nothing because it is steel is steel
What is the difference between steel and stainless steel?
While stainless steel is an alloy of steel, the primary difference between stainless steel and other steels is that the stainless steels have a high percentage (about 10% or even more) of the element chromium in them.
What is the difference between piston and plunger?
The difference between a piston and a plunger may be understood if you observe what forms the seal that precludes the fluid from passing either the Plunger or Piston. The 'piston' is a steel block equipped with elastomers that makes wall contact with the cylinder wall. As it moves inside the cylinder it wipes the wall and displaces the entire content of the cylinder. In this case the seals form part of the piston. The 'plunger' is a steel block that moves through a hole that is equipped with elastomer seals. The plunger displaces a portion of the cylinder contents, i.e., the volume of the plunger that enters the cylinder. The plunger does not wipe the walls of the cylinder. The seals, in case, are a part of the cylinder block. Umair Aslam Mechanical Engineer PARCO, Pakistan
What is the difference between 204 and 304 steel?
=== ===
What is Difference between tata steel and local steel?
Tata steel products are good quality.
What is the clearance between a piston and the cylinder?
The clearance between piston and cylinder walls is much larger than you might think; perhaps .05" or even more. The reason for such a large gap is partly manufacturing tolerances, but even more because of differential expansion of piston and cylinder as the engine first starts up and heats up.Both problems are solved by making the piston undersized and machining three or more rectangular section grooves around the outer surface of the piston. A hardened steel ring fits into each groove; it is sprung such that it presses against the cylinder wall. These piston rings take up the difference in diameter between piston and cylinder, and automatically compensate for differential expansion. They also take up wear as the engine ages. Another bonus is that the piston itself does not rub against the cylinder wall. The resistance to wear which is necessary for long engine life comes from the hardened steel rings. The piston does not have to be made of hardened steel, and many are actually made from aluminium.
What is the difference between steel pipe and steel tubing?
Wall thickness (Schedule)
What is the difference between steel and steel long?
one is long you dumb person
What is the difference between galvanized steel and zinc steel?
Galvanized steel sheet is basically indistinguishable from zinc steel. If you want to buy galvanized steel sheets. You can go to Shanghai Changzheng, which is the choice of most people for its superior quality steel sheets.
