Want this question answered?
A plug valave uses a cilindrical kind of element to shut down the flow. The ball valve uses a spherical element to sut down the flow
the hot water valve shut off valve shuts off the hot water. The cold water valve shuts off the cold water. ;()
A check valve allows for flow in one direction and a gate valve is used for positive shut off and a globe valve is used for throttling
A Knife Gate Valve is used to slice through sludge /sewerage and a gate is used fro normal positive shut off If you want to find the photo of Knife Gate Valve,you can enter to the link:http://www.kolinkcn.com/
A globe is designed for throttling and NON quick closing thus no hydraulic waves are caused. A ball type uses a ball normally stainless rather then a washer for a positive shut off
This depends what shut off valve is in question here. Where the leak is and what type of material is the shut off valve made of.
A combination valve is a pneumatically actuated shut-off valve. It is integrated into a valve housing and is typically used for blocking and releasing a flow between an inlet and an outlet
What to use to solder a shut off valve
where is the fuel shut-off valve on a 1998 4 runner?
shut off valve filters in tank stopped up or the valve is bad.
An air-intake engine shut-off valve regulates air-flow to the motor, and operates as an emergency shut-off valve. There are also shut-off valves on water hoses, so shut-off valves really control the inflow of any liquid or gas.
The spline that lifts and lowers the part to shut the valve be globe or gate valve