the merc was normally built with a windage tray, some say balanced bottom end but ive never found one to be. different cam and intakes. some were also set to run reverse rotation depending on if it was a twin engine setup or not. many of the core blocks are cracked also from being froze. best to stay away from for performance
57% of 350 = 57% * 350 = 0.57 * 350 = 199.5
It can be from 180 h.p. (Base Engine) to 375 h.p. (Corvette) depending on which 1991 5.7 liter engine you are talking about. You did not specify which 350, so you get no definitive answer.
The difference between 82 and 57 is 25, or 82 - 57 = 25
i have a gm goodwrench 350 with a summit hei distributor in my 58 Chevy truckits about 1/2 inch from my firewallso... little room to spare but yes it worked
43
57 years.
Depending on condition, about $350.
57
engine 57
To obtain this, you must subtract 57 - 37. In general, getting the difference between two numbers means you must subtract one from the other.
3.5 cu. in. (57 cc)
It is 65! the interval within teh difference is +5, -5, +5 the difference within the last digits is +3 then +5 is 8, 57 + 8 = 65