Want this question answered?
The frequency would decrease the gain and increase the output voltage
Audio output frequency is that range of frequencies that can be heard. For humans, that is generally considered to be the range of 20Hz to 20kHz.
Only in an AM system. In an FM system, variations in carrier amplitude are ironed out with hard limiting before demodulation.
3MHz
switching frequency is the one which regulates the switching device in a electronic circuit,by which the output voltage can be determined or can be cntrolled
modulation and demodulation
The frequency would decrease the gain and increase the output voltage
A; An amplifier will have no effect on the input frequency however its output may not follow the input frequency at the hi end due to the amplifier limitations
twice the input frequency
Audio output frequency is that range of frequencies that can be heard. For humans, that is generally considered to be the range of 20Hz to 20kHz.
In natural frequencies the output of the system will be less than the maximum level. In the resonance frequency the output of the system will be the maximum level.
Only in an AM system. In an FM system, variations in carrier amplitude are ironed out with hard limiting before demodulation.
answer for me please
There are several methods for generating FM signals but they all basically involve an oscillator with an electrically adjustable frequency. This type of oscillator uses an input voltage to affect the frequency of its output. For example, when the applied voltage increases, the oscillator output frequency increases and when the applied voltage decreases, the oscillator output frequency decreases as well. If no voltage is applied to the oscillator its output will be a signal at its centre frequency. The amount of frequency variations is deviated around the oscillators' centre frequency.
sampling gates are transmission circuits in which the output is an exact replica of input wavefrom during that selected time interval and is zero otherwise that means only for selected time period the output remains same and for remaining time period the output is zero swamyuniveres@ymail.com
3MHz
The difference is in the output frequency.