0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
If you are threading one half inch diameter steel pipe and it is going between two female fittings how much pipe needs to be cut if your center to center distance between the fittings is nine inches?
I'm confused by your use of the term, center to center. I'm guessing you mean from the face of the fitting where the pipe threads in. You can usually screw in about 1/2 inch of pipe into a female fitting, so you would need 10 inches to end up with 9 in between. You can screw this together without a union in between? You can only put pipe together in one direction unless you use a union.
What is meant by fitting allowance?
The fitting allowance is the difference: (pipe end to fitting center measurement) minus (pipe end to end measurement). It is the amount of length the fitting adds to the end of the pipe (to get the center of the turn).
What is Pipe Fitting End Caps and who manufactures it?
Pipe Fitting End Caps are pushed to connect and are also the easiest way to cap off pipelines. They are used for pressure testing, stub outs, and can be installed on both wet or dry pipes. The pipe fitting that covers the end of a pipe is called end cap pipe fitting. Western Steel Agency is one of the most leading Pipe Fittings Manufacturer, Suppliers in India. We have manufactured with precision and high-quality raw materials. Pipe Fittings are designed to be welded on-site at their end to link pipes together and allow for changes in path. Steel Pipe Fitting products are designed and developed in accordance with international quality standards. Learn more about Pipe Fittings Manufacturer
What are Pipe Fittings and who manufactures it?
Pipe fittings are components that are used to connect pipe sections with other fluid control products such as valves and pumps to form pipelines. The term fittings is commonly associated with those used for metal and plastic pipes that transport fluids. Other types of pipe fittings can also be used to connect pipes for handrails and other architectural elements where a leak-proof connection is not required. Depending on the material of the pipe, pipe fittings can be welded or threaded, mechanically joined, or chemically adhered, to name a few common mechanisms. Western Steel Agency is one of the most leading Pipe Fittings Manufacturer, Suppliers in India. We have manufactured with precision and high-quality raw materials. Pipe Fittings are designed to be welded on-site at their end to link pipes together and allow for changes in path. Steel Pipe Fitting products are designed and developed in accordance with international quality standards. We are also manufacturer and supplier of Inconel 600 Pipe Fittings , Inconel 625 Pipe Fittings pipe fitting grades.
How do you calculate the center of gravity of a pipe?
Along the extent of the pipe, it balances at one distance from its end.
In pipe fitting sizes such as -4AN what does AN stand for?
AN stands for Army Navy. The AN fittings have a 37 degree conical end which is what makes the seal.
How do you find out the lenght of a piece of a pipe on a 45 degree angle?
Can you measure the distance from the corner to either end of the pipe ? The length of the pipe is (1.414) times that distance.
What does baloney cut exhaust mean?
the open end of the exhaust pipe is cut at an angle.
Are aqua pex fittings and super pex fittings the same?
I had the same question today. The answer is no. Aquapex had an aluminum casing and so the sharkbite fittings will not work on Aquapex. Now searching for aquapex fittings. Yes, the Sharkbite fittings work on Aquapex. I plumbed my cottage 3 years ago with Aquapex and fittings. Recently, I have had difficulty finding Aquapex fittings. My new work is done with Sharkbite fittings. These fit easily onto the Aquapex pipe. I have used tee joints and inline valves. As with Aquapex fittings, yo have to ensure that the pipe end is round first. Use the Aquapex reaming tool. ---------- The link below can give you a better understanding of PEX fittings types.
Why is water pressure less at one end of home than the other?
Friction losses through pipe and fittings and overcoming head pressure
How do you connect brass pipe to PVC pipe?
If the brass threaded nipple is a male end and the PVC side is a female end, wrapping thread tape around the nipple and then screwing it into the female PVC end will provide a secure and watertight connection.
Why is it called Hub and spigot drain pipe?
The Hub and Spigot are two types of fitting on either end of a pipe.At one end you have the Hub (Socket) fitting; which is a "female" end of a fitting designed to accept pipe or a SPIGOT connector.At the other end you have the Spigot fitting; which is a "male" end of a fitting designed to be used inside another fittings Socket (or Hub) end.
