It's usually a green and red wire.
it should be the blue and white wire
No, example- If the wire is blue with a white strip, (which is your remote wire for the amp turn-on) the wire is blue, the strip is not the color.
Yellow Wire.
A Chrysler Concorde does not use a distributor, so there is no coil wire.
For a 7-way trailer connector, the right turn signal wire is green. The left turn signal wire is yellow. The ground wire is white. The tail/marker wire is brown. The brake wire is blue. The batter wire is either red or black. The back up wire is purple.
black
blue and yellow
The remote wire on the factory radio in a 2005 F150 Ford Supercrew is usually blue. The remote wire is used to connect extra things to a radio that are not already factory installed.
Depends which color u are talking about blue is for antenna if ur car has blue/white is a remote turn on for amps including factory or aftermarket
If your are using a wire kit, you need to connect the blue and/or blue/white wire from the harness to the blue/white wire from your radio. Now if you have cut your wires you will have to locate the one wire that will turn on your factory amp.Good Luck!!!!
pink
The Pontiac Grand Prix goes by the GM Factory Wire Harness Color Codes. http://www.installdr.com/harnesses/GM-Wiring.pdf