this can sometimes be a confusing answer, I will try to clarify it as much as i can. According to Saturn timing specifications, the internal firing order for the Saturn 1.9L motor, both Single overhead cam, or Twin cam is as follows:
Left to right 1-3-4-2
If you are routing spark plug wires, and need to know the order of wires from the coils to the engine, the order is as follows:
Left to right 4-1-2-3
The 95 Saturn SL1 does it too.
top with the trans
which light is blinking??need more info
If its a manual, it will bolt up and function, but not properly. If its an automatic, it will bolt up and not function at all.
Try here... http://thecommi.angelfire.com/index.html
The lower motor mount is located on the driver side attached to the transmission.
Connect an engine diagnostic scanner to find out what is wrong.
If I remember correctly, the 95 SL2 has a 12.8 gallon tank.
firing order for a 1995 ford bronco 5.8 ltr
The only hard part is the EGR valve assembly. The head on the newer Saturn is slightly different, making it necessary to find a work-around for the EGR valve.
The system needs to be replaced as a whole. Saturn does not let you bleed the Slave, it comes pre-bled.A Haynes manual will walk you through step by step
I just removed the rear brake drums yesterday on my wifes 94 Saturn SL2 I used a 1/2 inch round shaft 6" long and tapped the drum from behind the backing plate slid right off Good Luck