0
What else can I help you with?
What is the first configuration change you should make when you first intall a router?
It is always good practice to change the default password to something else. If it is a wireless router you should also change the default SSID and enable an encryption method.
What is the first configuration change you should make when you first install a router?
When you first install a router, before you do anything else, change your router password and disable the wireless network until you have time to set up and test the wireless security.
How do I set up Linksys wireless router?
First make sure you have what you need: the router, a computer, and the instructions for setting up. Then you connect to the internet, connect your router, configure your router and you should be on your way. Your instructions should really help you with this or you can call your internet provider for technical support.
How do you change the router bit?
To change a router bit, first, ensure the router is unplugged for safety. Use the wrench that came with your router to loosen the collet nut by turning it counterclockwise. Remove the old bit, insert the new one into the collet, and tighten the collet nut securely by turning it clockwise. Finally, plug the router back in and perform a test run to ensure the bit is properly installed.
How do I install a Linksys wireless router?
The instructions for setting up your Linksys wireless router should be included with the router. They may also appear on a setup disk. Essentially, you need to plug you Internet source into the router and run the setup procedure.
What do you have to do to get Internet on your PS3?
You have to have a router. When that sends out signal, your PS3 will catch it and you will have internet. First setup your router. Then go to the Network setings on your PS3 and then click on "SCAN" . Then your router name should show up on the screen. Click on that and enter your password (If you have one, I recommend that you do). Then go to your PS3 browser and connect to your router and then the internet should work!
Can 2 wireless routers be connected to a router i have a netgear and d-link router and a ubee modem?
Yes, you can do that. But it can be done only in series type connection not in parallel. Meaning that you should connect one of your router directly to the modem and another router connect to the first one.
How do you set up your windows 2000 on your linksys router?
First you plug your router to your cable modem or whatever you have, then you either insert the CD that came with the Router, or browse to: http://192.168.1.1 Username can be left blank and password should be "admin"
How do I change the security settings on my sagem router?
To change the security settings on your Sagem router, first, connect to the router's web interface by entering its IP address (usually 192.168.1.1 or 192.168.0.1) in your web browser. Log in with your credentials (often found on the router or in its manual). Navigate to the “Wireless” or “Security” section to update settings like the Wi-Fi password, encryption type, and firewall settings. After making your changes, remember to save the settings and restart the router if necessary.
How do you change your router to mixed mode?
To change your router to mixed mode, first, log in to your router's web interface by entering its IP address into a web browser. After logging in with your admin credentials, navigate to the wireless settings section, where you can usually find an option for "Wireless Mode" or "Network Mode." Select "Mixed" or "Mixed Mode" from the available options, then save your changes and reboot the router if necessary. This will allow your router to support both older and newer wireless devices.
Why should you change your routers password before making any other security changes?
Changing the router password is one of the first security precautions one should take with their computer system. This is because routers come with standard passwords, so if the password is left unchanged someone could easily hack into the system.
How do you install a network router?
Well first, make sure you have everything you need at hand: the router, the computer, the instructions. Then, connect to the internet, connect the router by following the instructions, configure the router and connect your vices. Your instructions should be your biggest guide through this but if you still need help, go to www.microsoft.com for further help.
