The first thing you should do when preparing an AED for use is to turn it on. Some AED's will turn on when they are opened, or you will have to push a button to turn it on. Once the AED is on, the AED will give instructions on what to do next.
First step is to turn on the AED.
To use the AED, first turn it on. Place the pads on the patient. (and plug the pad leads into the AED if required). The AED should analyze at this point; now follow the instructions of the AED.
First step is to open the AED. If it does not turn on when you open it (some do), turn on the AED. Follow instructions of AED. Be sure to wipe off the chest and rib area before applying the pads.
Turn the AED on then follow the instructions it gives you.
Turn on the AED
when the AED tells you to do so
when the AED tells you to do so
when the AED tells you to do so
Check for a pulse; if no pulse resume CPR. The AED will reanalyze in 2 minutes.
Do not use the AED if the person has a pulse.
Prior to using an AED you should confirm the absence of a pulse.
Place the AED pads on the chest.
If you are not clear, the AED could shock you as well.